f4istunna Posted September 13, 2011 Report Share Posted September 13, 2011 Parting out a complete 01. Engine runs, shifts good. Compression was getting low. Located near youngstown ohio. Local pickup on the frame. I can ship the rest if needed. I accept paypal or money orders. I will ship by next business day after payment. +4 Swingarm, with chain. pc silvervein $250 pretty sure its lonestar but not 100% sure on that +2 chrome a arms with good balljoints and tierods (not sure brand) $175 +2 Durablue Axle $125 Modquad head with 21cc domes oringed 125 Full Toomey T5 exhaust system (pipes and silencers) 250 IMS oversize gas tank blue with petcock and cap needs cleaned up (prev owner painted, i stripped most off. $75 Vforce 3 carbon fiber reeds with spacers $125 Dual filter aluminum intake / airbox $40 Ohlins front shocks (standard travel) $250 Douglas front rims nice shape $50 Protaper Se bars $30 chrome flame grill / radiator guard $30 Aluminum front bumper $30 29mm keihin PWK carbs tors eliminated with terry cables. ( Good except choke doesnt stay up) $125 for the set Chrome stock height steering stem $60 seat custom cover $50 Heavy duty billet case saver with bolts $20 Bottom end is good, cases has the normal small peice busted from chain no leaks or issues stock stroke, good crank and bearings, good stock trans. Comes with flywheel and good stator with covers $350 Cylinders 64.5mm with pistons good shape pistons need rings. $250 Complete clutch , basket plates everything $70 Stock radiator $10 Shifter $5 Thumb Throttle $20 Ignition switch with key $20 Complete wiring harness with coil, cdi etc. (plug is cut off going to stator (was wired directly) $40 Stock rear shock $50 Rear linkage $10 Frame, Pc orange nice shape $150 Intake boots with crossover tube $20 Front wheel hubs with chrome spindles $50 Rear wheel hubs $40 Brake hub and rotor rear $20 Complete front brake assembly (master cylinder, both calipers and braided lines) $60 Complete rear brakes lever/master, braided line, caliper $60 Complete engine mount set $15 Axle carrier Good bearings $50 Stock rear wheels with 1/2 tread tires (few plugs) $50 Yellow tank cover and radiator plastic good tabs $30 Yellow tank cover $15 Orange tank cover and grill plastic $30 Black maier front fenders factory race cuts, and black radiator/grill plastic $40 Rear plastic (painted black) $20 Front plastic cut (painted black) $20 Red front plastic with tank cover and grill/radiator plastic $40 Blue tank cover $10 (cpl stress marks) Stock seat needs recovered $10 HEadlight/ run switch works good small peice of Hi/Lo headlight switch broke off still enough there to use $15 Might have forgot a cpl things so if you dont see it listed ask . Ill keep the list updated as stuff sells. If you see it i still have it. i have a few pics I can get pics of anything you guys are interested in just ask. I need to resize the ones i have ill do that when i get home tonight Thanks Quote Link to comment Share on other sites More sharing options...
06specialedition Posted September 13, 2011 Report Share Posted September 13, 2011 Pics of +2 a-arms to: themissingline@hotmail.com Quote Link to comment Share on other sites More sharing options...
YamahaBansheeNyZ Posted September 13, 2011 Report Share Posted September 13, 2011 Hi, Very interested in the following: +2 chrome a arms with good balljoints and tierods (not sure brand) $175 +2 Durablue Axle $125 Modquad head with 21cc domes oringed 125 Full Toomey T5 exhaust system (pipes and silencers) 250 Vforce 3 carbon fiber reeds with spacers $125 Dual filter aluminum intake / airbox $40 Ohlins front shocks (standard travel) $250 Maybe even a few more parts. Please get back to me!! I can be reached at 607-644-4497. Please give me a ring!!! I just want to talk over their condition, how to arrange either pick up or shipping. Thank you. Quote Link to comment Share on other sites More sharing options...
f4istunna Posted September 13, 2011 Author Report Share Posted September 13, 2011 06 sent pics nyz ill call you tonight when i get home Quote Link to comment Share on other sites More sharing options...
Chevy4life32 Posted September 13, 2011 Report Share Posted September 13, 2011 pm sent Quote Link to comment Share on other sites More sharing options...
Bri894 Posted September 13, 2011 Report Share Posted September 13, 2011 can you send pics of the +4 swinger and chain to rahwaywreckingcrew@hotmail.com Quote Link to comment Share on other sites More sharing options...
youngshee Posted September 13, 2011 Report Share Posted September 13, 2011 send pics of bottom end to djk9688@aol.com, thanks, also interested in the vforce reeds if nyz doesnt take them Quote Link to comment Share on other sites More sharing options...
volcrano Posted September 13, 2011 Report Share Posted September 13, 2011 Pics of carbs to 330-414-2899.are they actaul bored 28 pwks or overbored stockers?just askin cuz pwks dont have tors set up.thanks!! Quote Link to comment Share on other sites More sharing options...
Joe H. Posted September 13, 2011 Report Share Posted September 13, 2011 Pics of the bumper, thumb throttle, pro taper bars as well as the on/off light switch to: lumbeetrouble09@aim.com. Thanks Quote Link to comment Share on other sites More sharing options...
Joe H. Posted September 13, 2011 Report Share Posted September 13, 2011 Also do you have the front headlights? If so can you send pics. Thanks Quote Link to comment Share on other sites More sharing options...
hp2000 Posted September 13, 2011 Report Share Posted September 13, 2011 Pics of front Dwt wheels and pro taper bars to: eclpsrcr@msn.com Quote Link to comment Share on other sites More sharing options...
Irishchris Posted September 13, 2011 Report Share Posted September 13, 2011 Can u send pics of the airbox to gchris90@ymail.com Quote Link to comment Share on other sites More sharing options...
FullThrottle_06' Posted September 13, 2011 Report Share Posted September 13, 2011 P.M. Sent Quote Link to comment Share on other sites More sharing options...
2004LEBanshee Posted September 13, 2011 Report Share Posted September 13, 2011 What shape is the frame in? I live in Canfield ohio. What year does it have title? Quote Link to comment Share on other sites More sharing options...
tortuga Posted September 14, 2011 Report Share Posted September 14, 2011 i'll take; Complete wiring harness with coil, cdi etc. (plug is cut off going to stator (was wired directly) $40, paypal. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.