what are the heads and cylinder nuts torqued at?

[UPbansheeRacer]

just powder coated my engine what are the nuts for the cylinders and head torqued at

[bigblockbanshee]

Edit: Make that 20ft.-lb.

Edited September 8, 2011 by bigblockbanshee

[Infamous039]

Clymers manual say 20ft lbs

[dirtydownunder]

starting from the middle and working your way out, torque in steps. 7ft/lb 14ft/lb 20ft/lb then once youve had it hot, let it cool down over night and re torque to 20-22ft/lb

[Larry's Shee]

Criss-cross cyl nuts in stages just like heads, re-torque after heat cycles also

[camatv]

20 ft lbs.

[jbooker82]

snug with a box end wrench.