Jump to content

Recommended Posts

Posted

ok i let someone ride my banshee and they loaded it bad and got on it to clear it out and was only running on one cylinder so i figured i fouled a plug so i went to the store got two new plugs and same thing swaped the coils over and same thing, but when i turn the gas off while riding it begins to fire and run fine until it runs out of gas, but the compression is good. so itook the carbs apart and cleaned them good and checked the right float and it floats put it back together and same thing need HELP.

Posted

ok i let someone ride my banshee and they loaded it bad and got on it to clear it out and was only running on one cylinder so i figured i fouled a plug so i went to the store got two new plugs and same thing swaped the coils over and same thing, but when i turn the gas off while riding it begins to fire and run fine until it runs out of gas, but the compression is good. so itook the carbs apart and cleaned them good and checked the right float and it floats put it back together and same thing need HELP.

did you check the float height did it back fire when it was loading up if so it might have cracked a reed

Posted

how about your jets. what jets are in your bike......both main and pilot jet sizes. And what elevation are you at with what mods done to your motor. i know you did it to help diagnose your issue your having but shutting the fuel off and letting it run out in a mixed fuel 2stroke is not good for it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...