SuperMex Posted August 28, 2011 Report Posted August 28, 2011 The black with gold rods or gold with black rods Chinese cranks worth it or p.o.s. ? What's a good crank money isnt an issue but I don't need a billet $1000 crank Quote
Phelps Posted August 28, 2011 Report Posted August 28, 2011 hit up andy at M&MATV he is a site sponsor and sells good cranks for a good price. Quote
SuperMex Posted August 28, 2011 Author Report Posted August 28, 2011 Yeah, Denny sorry i spelled it wrong. Are his cranks garbage? @ Phelps-I was looking at M&Ms cranks right now aren't they Chinese ones? Look just like them. I need a crank and was wondering if anyone has used these as opposed to Hotrods or some pricier ones. Quote
Phelps Posted August 28, 2011 Report Posted August 28, 2011 Yeah, Denny sorry i spelled it wrong. Are his cranks garbage? @ Phelps-I was looking at M&Ms cranks right now aren't they Chinese ones? Look just like them. I need a crank and was wondering if anyone has used these as opposed to Hotrods or some pricier ones. don't hold me to it, but i am sure the webbing and rods are the same on the stock stroke and 4mil. the 10 mils have different rods. Andy buys them in pieces and builds them himself so quality control is light years past the thrown together ones on ebay not to mention they are trued and welded by a reputable person. you can get upgraded bearings at very little extra. i run his 10mil crank and have 0 issues with it. by far less money than billet and being forged over billet it will take some neglect when human error comes into play. Quote
camatv Posted August 30, 2011 Report Posted August 30, 2011 wang is easy to deal with i use those for the local stocker rebuilds i do. they seem to be holding up fine.. if it was a race motor i'd get one from andy the next 10 mill i do will have one of those in it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.