Josh Z Posted June 1, 2011 Report Posted June 1, 2011 All prices are shipped in the US. if you are in canada or anywhere else ask for a price. complete set of chrome a arms that are in great shape. really good chrome (dirty in the pic. sorry) also will come with chromed tie rods $150 shipped (SALE PENDING)Trinity cool head with 20 cc domes, in great shape needs a new oring kit and ready to go (SALE PENDING) (2) complete front brake systems, (included master cyl, steel lines, and hoses, and calipers with pads) these systems just need fluid and go... $55 each (2) complete sets of spindels and hubs with brake rotors. ( I know one set is missing a stud but the other sets are perfect) all bearings seem good too $55 per set shipped complete shocks off of a '94 I think they are yellow inside the covers (I will get pictures asap) I will do $100 for the complete set or $60 for the front and $60 for the back... includes blue covers (SOLD)Dura blue heavy duty axle. The axle is not extended Just the heavy duty version. it is in great shape and will polish up very nicely(SOLD) rear skid plate (seen on alxe pics) $25 shipped in great shape (SALE PENDING)stock straight axle no blemishes etc $65 shipped(SALE PENDING) stock radiator and hoses this one was bent a little but it still holds water just fine and works great $25 (SOLD)stock set of cylinders I believe the bore is either 65 or 65.50. I will know for sure asap. they have wiseco pistons in them and are ready to run will come with pistons, cyls, rings, wrist pins and circlips (SOLD) rear brake system includes lever, master cyl, hose and caliper $65 shipped stock carrier with bearings and both axle hubs (brake hub and disk and sprocket hub) $50 shipped (SOLD)DG aluminum front bumper in great shape barely used (SOLD) (SOLD)stock carbs with tors removed and idle screws installed $60 shipped(SOLD) stock intakes with boost bottle no cracks and stock box to carb boots $25 (SOLD)stock reeds and cages $20 shipped(SOLD) (SOLD)nerf bars (IDR the brand) I will get detailed pics asap $70 shipped(SOLD) I also have 1 titled frame title is in UT and clean and clear I will go $300 shipped in the US or about $250 picked up. blue and black and blue seats covers are in great shape no holes or rips etc $65 per seat or $50 for just the covers (SOLD)Billet inline water cooler $15 shipped(SOLD) stock CDI for a 96- banshee $50 front brake master cyl with rubber gripped lever $25 set of front tires and wheels tires are in great shape very little use. (one rim in the pic is ugly. I traded it out with a good rim so both rims are clean and in good shape) not gold!!! $90 shipped red rear shock IDK what condition it is in. $20 shipped (SOLD)909 handle bars straight not bent in good shape $20 shipped(SOLD) set of 8" douglas blue label rims $85 shipped (SOLD)wire harness from a '94 shee (round plug) nothing cut off all there. $35(SOLD) (SOLD)polished thumb throttle (never mounted ready to go) $45 shipped(SOLD) polished stock heads Fresh polish $80 sand skate 2 paddles on 10" rims in pretty good shape $90 shipped thanks ask away! Quote
kodie Posted June 1, 2011 Report Posted June 1, 2011 I got a frame off josh good guy. Don't hesitate to get stuff off this guy. Josh have any lights yet? Quote
olyeller Posted June 1, 2011 Report Posted June 1, 2011 can you send me some pix of the cylinders if you still got them. would you take 225 for the cylinders and the thumb throttle? was those prices shipped? Quote
Josh Z Posted June 1, 2011 Author Report Posted June 1, 2011 all pms replied.... pm me your offers. Quote
steady Posted June 1, 2011 Report Posted June 1, 2011 pm sent on blue labels, thumb throttle, inline cooler.... Quote
Rotax Raptor Posted June 2, 2011 Report Posted June 2, 2011 Money sent for cylinders and pistons. Quote
itsTyler Posted June 2, 2011 Report Posted June 2, 2011 I'll get ahold of u wen I get paid, I need a rear caliper for my shee, and I might put a banshee axle and brake setup into my blaster have to see how the funding is. I got my pro design head from Josh, he's a a+ guy no need to worry. Quote
itsTyler Posted June 2, 2011 Report Posted June 2, 2011 I'll get ahold of u wen I get paid, I need a rear caliper for my shee, and I might put a banshee axle and brake setup into my blaster have to see how the funding is. I got my pro design head from Josh, he's a a+ guy no need to worry. Quote
SheezFast02 Posted June 3, 2011 Report Posted June 3, 2011 Josh I'll take the billet in-line cooler if it's available. I can send payment as soon as I hear back from you. Let me know! Quote
Concrete Posted June 3, 2011 Report Posted June 3, 2011 Are you willing to separate the wheels from the tires? What condition are they in Quote
Josh Z Posted June 3, 2011 Author Report Posted June 3, 2011 Are you willing to separate the wheels from the tires? What condition are they in are you needing wheels or tires?? which set are you talking about? Quote
Strm Trpr Posted June 3, 2011 Report Posted June 3, 2011 (edited) I have to work on my Banshee this weekend. I may need a complete front brake set-up from brake lever to both front calipers, hubs, rotors and spindles. Edited June 3, 2011 by Strm Trpr Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.