eldreder Posted May 17, 2011 Report Share Posted May 17, 2011 i pulled the head off my banshee the other day and it's pretty torn up, is there anyway to fix it? if not, does someone want to sell me one? Quote Link to comment Share on other sites More sharing options...
CFH87 Posted May 17, 2011 Report Share Posted May 17, 2011 Would have to have it milled not sure how much it would need. If you do end up needing one I've got one in mint condition for sale just shoot me a pm. Quote Link to comment Share on other sites More sharing options...
benb5241 Posted May 18, 2011 Report Share Posted May 18, 2011 If it was me I would definitely replace it. The real question though is, how did it get like that in the first place? Quote Link to comment Share on other sites More sharing options...
eldreder Posted May 18, 2011 Author Report Share Posted May 18, 2011 If it was me I would definitely replace it. The real question though is, how did it get like that in the first place? it's been rebuilt quite a few times, my girlfriend's dad gave it to me, it's had 3 crank bearings go out on the same side, he gave me a box of old parts that had 6 old pistons in it, so it's definitely had it's share of beating on. also, there's a crack in the back right side of the lower half of the case, that's been welded, i'll have to get pictures up, i hope that won't cause problems Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted May 18, 2011 Report Share Posted May 18, 2011 looks like one of those bearings did the cha-cha dance all up and down that head.......id replace it....hell you can buy a stock head on here for usually around $25-35. Quote Link to comment Share on other sites More sharing options...
eldreder Posted May 18, 2011 Author Report Share Posted May 18, 2011 if you replace, could i get that head from you, for free? that makes me think there's still hope for it haha Quote Link to comment Share on other sites More sharing options...
CFH87 Posted May 18, 2011 Report Share Posted May 18, 2011 I've got one thats mint if you need one... Quote Link to comment Share on other sites More sharing options...
shanYE west Posted May 19, 2011 Report Share Posted May 19, 2011 mill and rechamber will clean it up.. but.. its gonna cost more then a good used head. Quote Link to comment Share on other sites More sharing options...
ionroller Posted May 19, 2011 Report Share Posted May 19, 2011 clean it up and use it. It sounds like you done have a show bike anyway!!! Quote Link to comment Share on other sites More sharing options...
mopar1rules Posted May 19, 2011 Report Share Posted May 19, 2011 I have a 2 good used stock heads. One is cut .030" and the other is not cut. $30 for the shaved one and $15 for the un-cut one. Just shoot me a pm if you want any of them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.