head is pretty torn up

[eldreder]

i pulled the head off my banshee the other day and it's pretty torn up, is there anyway to fix it? if not, does someone want to sell me one?

 

[CFH87]

Would have to have it milled not sure how much it would need. If you do end up needing one I've got one in mint condition for sale just shoot me a pm.

[benb5241]

If it was me I would definitely replace it. The real question though is, how did it get like that in the first place?

[eldreder]

If it was me I would definitely replace it. The real question though is, how did it get like that in the first place?

 

it's been rebuilt quite a few times, my girlfriend's dad gave it to me, it's had 3 crank bearings go out on the same side, he gave me a box of old parts that had 6 old pistons in it, so it's definitely had it's share of beating on. also, there's a crack in the back right side of the lower half of the case, that's been welded, i'll have to get pictures up, i hope that won't cause problems

[Jereme6655]

looks like one of those bearings did the cha-cha dance all up and down that head.......id replace it....hell you can buy a stock head on here for usually around $25-35.

[eldreder]

if you replace, could i get that head from you, for free?

 

that makes me think there's still hope for it haha

[CFH87]

I've got one thats mint if you need one...

[shanYE west]

mill and rechamber will clean it up.. but.. its gonna cost more then a good used head.

[ionroller]

clean it up and use it. It sounds like you done have a show bike anyway!!!

[mopar1rules]

I have a 2 good used stock heads. One is cut .030" and the other is not cut. $30 for the shaved one and $15 for the un-cut one. Just shoot me a pm if you want any of them.