252wheelieking Posted February 25, 2011 Report Posted February 25, 2011 I have my cases split & all my internal parts out. I was wondering if you guys could tell me the chemicals or cleaning solvents you use to clean your cases? Or some ideas on a solvent thats known for cleaning the cases pretty good. Thanks in advance. Quote
okbeast Posted February 25, 2011 Report Posted February 25, 2011 I've used gasoline, diesel, carb cleaner, car wash, anything really. Depends on how dirty they are. 1 Quote
Coupelx Posted February 25, 2011 Report Posted February 25, 2011 let the hoe in your sig lick it clean. Quote
252wheelieking Posted February 25, 2011 Author Report Posted February 25, 2011 let the hoe in your sig lick it clean. You gots to be crazy....Do you know who your looking at in my sig.........THAT'S NICKI MINAJ.....I'll trade my shee for her anyday... Quote
bansheesrtoys Posted February 25, 2011 Report Posted February 25, 2011 shit, i don't care how fine or great the pussy is. No and i mean no pussy is worth my shee. women age like milk banshees age like wine only gets better.lol Quote
252wheelieking Posted February 25, 2011 Author Report Posted February 25, 2011 let the hoe in your sig lick it clean. shit, i don't care how fine or great the pussy is. No and i mean no pussy is worth my shee. women age like milk banshees age like wine only gets better.lol Can we please stick to the topic....I want to know how to get my cases clean....I'm not worried about women.....that's automatic for me. Suggestions on cleaning solutions for my cases please? Quote
troyzstang Posted February 25, 2011 Report Posted February 25, 2011 Can we please stick to the topic....I want to know how to get my cases clean....I'm not worried about women.....that's automatic for me. Suggestions on cleaning solutions for my cases please? Listen I don't want to sound like an ass. Don't take this personal but I really wish you would lose the almost pornographic photos. I enjoy this site but photos like yours really isn't cool. How do you think my wife feels when she looks over to see what i am reading and sees that on my screen. Can anybody else relate Quote
Larry's Shee Posted February 25, 2011 Report Posted February 25, 2011 Bead blast , hot tank at transmission shop, some kind of acid they use on big trucks, scotch brite pad with elbow grease. Maybe make the pic a little smaller. Quote
Coupelx Posted February 25, 2011 Report Posted February 25, 2011 Listen I don't want to sound like an ass. Don't take this personal but I really wish you would lose the almost pornographic photos. I enjoy this site but photos like yours really isn't cool. How do you think my wife feels when she looks over to see what i am reading and sees that on my screen. Can anybody else relate i found it annoying. especially since i dont find her attractive. firefox save the day with a right click and 'block image'. Quote
sleeper06 Posted February 25, 2011 Report Posted February 25, 2011 glass bead them i usually charge 35-40 bucks and they come out new,perfect again no need to waste hours scrubbing any good performance shop should be able to take care of it just make sure there not using black magic media a few of my friends had issues with it tearing up motors Quote
jbooker82 Posted February 25, 2011 Report Posted February 25, 2011 i found it annoying. especially since i dont find her attractive. firefox save the day with a right click and 'block image'. looks like she has a dick in that pic too. Quote
Jereme6655 Posted February 25, 2011 Report Posted February 25, 2011 glass bead them i usually charge 35-40 bucks and they come out new,perfect again no need to waste hours scrubbing any good performance shop should be able to take care of it just make sure there not using black magic media a few of my friends had issues with it tearing up motors hey.....when you glass bead them...do you have to have the mating surfaces remachined? i always wondered if blasting cases would cause issues with sealing or anything Quote
dirtydownunder Posted February 25, 2011 Report Posted February 25, 2011 i had mine wet bead blasted and they came out like new. i had all of the mounting surfaces taped up, but the peeps removed it as the beads are so small and light, it only removes the top surface like it polishes the aluminium only and doest distort or warp it in any way. Quote
camatv Posted February 26, 2011 Report Posted February 26, 2011 you cannot remachine the stock cases in anyway they are horz split there is no material you can safely remove. i use a solvent tank. never tried bead blasting them just to scared to try. maybe a light media? Quote
Nieskes Posted February 26, 2011 Report Posted February 26, 2011 Bead blasting them works great, I always throw mine in the spray washer first then beadblast, looks better then new. Just remember to blow out all the holes. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.