30years Posted February 21, 2011 Report Posted February 21, 2011 I'm looking to get some port work done and i want it done right. Looking for suggestions of best places to get it done. I live in Michigan and don't know if there are places close to me that I could go to, or if I should just have em sent out. Quote
robert.b.west Posted February 21, 2011 Report Posted February 21, 2011 Send them out. Site sponsors are great. Quote
stacman450 Posted February 21, 2011 Report Posted February 21, 2011 Herr Juggs Racing... call Kevin up.. good prices, faaaast turnaround.. even better porting.. cant go wrong. Quote
06specialedition Posted February 21, 2011 Report Posted February 21, 2011 Any sponsor on here will do a kick ass job. Call around and get some prices and a feel for who you want to have do it. I had Wildcard Racing port mine and I couldn't be happier, Brandon is a perfectionist at his work! Quote
volcrano Posted February 22, 2011 Report Posted February 22, 2011 I'm looking to get some port work done and i want it done right. Looking for suggestions of best places to get it done. I live in Michigan and don't know if there are places close to me that I could go to, or if I should just have em sent out. rb porting is in michigan.he did my porting and its a beast.super clean job,as good as anybody else in the profession.theres a good amount of guys on here that have his work.i believe 87sheerips has their port to on a stock stroke beating 4mil bikes.thats just from reading posts so dont quote me,but id send to him,i did. Quote
30years Posted February 22, 2011 Author Report Posted February 22, 2011 Well thanks guys. I figured that using site sponsors would be the way to go, but just wanted to hear exactly who I should use. Quote
volcrano Posted February 22, 2011 Report Posted February 22, 2011 Well thanks guys. I figured that using site sponsors would be the way to go, but just wanted to hear exactly who I should use. im sure all listed will do a great job.i would pick the one with the best prices to turnaround time.everybody is gonna say one is better than the other,but in my opinion,any perfectionist that can use the tools correctly and has the mathematics down to do porting will build u a great motor. Quote
87sheerips Posted February 22, 2011 Report Posted February 22, 2011 I will say it time and time again... I dont care what anyone else says. For best price and fastest turnaround time contact Rob @ RB racing (IN LANSING, MI). 517-388-3662 he may not be that well known or hold any records but let me tell you my stock stroke trail/dune bike rips and he didnt break my bank. Quote
87sheerips Posted February 22, 2011 Report Posted February 22, 2011 rb porting is in michigan.he did my porting and its a beast.super clean job,as good as anybody else in the profession.theres a good amount of guys on here that have his work.i believe 87sheerips has their port to on a stock stroke beating 4mil bikes.thats just from reading posts so dont quote me,but id send to him,i did. ha, just caught this... yes i have beat a few 4mils with my stock stroke duner for sure. Rob knows whats up and I will someday build a stock stroke drag bike with his name on it. 35PWKs + VF 3's + RB Dune port + CPI SB Inframes + 180psi (give or take) +4 timing + 110 octane is a hot ticket setup IMO Quote
30years Posted February 23, 2011 Author Report Posted February 23, 2011 I've checked out his prices (RB racing), and he seems to be the best bet. Especially after all the threads I found on his work. Thanks Quote
Larry's Shee Posted February 23, 2011 Report Posted February 23, 2011 Didn't notice before you were in Mi , sorry. Check with Mike at Lakes Motorsports in Waterford. I belive Tricked Carbine on here has an engine by him. http://www.lakesmotorsports.com/ Quote
252wheelieking Posted February 23, 2011 Report Posted February 23, 2011 Any site sponsor but from personal experience Kevin at HJR. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.