bennny Posted February 13, 2011 Report Posted February 13, 2011 on a 2001 banshee the same as that on an 03 400ex? I'm searching the web on my phone and it's a pain trying to find the specs. I have sand paddles for the 400ex left over from when I sold it, and am hoping I can just throw them on the shee Quote
gst_r Posted February 13, 2011 Report Posted February 13, 2011 No, you cant! bolt pattern for banshee is 4x115 on honda is 4x110....maybe you can drill new pattern on those honda rims... Quote
bennny Posted February 13, 2011 Author Report Posted February 13, 2011 No, you cant! bolt pattern for banshee is 4x115 on honda is 4x110....maybe you can drill new pattern on those honda rims... I'll just get new rims, thanks! Quote
Larry's Shee Posted February 13, 2011 Report Posted February 13, 2011 I do belive thats the same as Blaster wheels, just get some Blaster hubs. They will fit Banshee axle. Quote
MN SHEE Posted February 13, 2011 Report Posted February 13, 2011 i beleve 400ex hubs will go right on the banshee also Quote
jayzx10r Posted February 15, 2011 Report Posted February 15, 2011 The short answer is NO. You can find it all here: http://www.mud-throwers.com/atv_wheel_chart Quote
dave5.0 Posted February 19, 2011 Report Posted February 19, 2011 Banshee, blaster, and 400ex all have different bolt patterns. The axle splines are the same though. You could get some 400ex hubs prob cheaper than wheels and use your existing wheels. If ya find an extra set of hubs hook me up. I could use another set. Or if ya wanna get rid of those honda wheels cheap. Depending on the size. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.