chevybanshee91 Posted December 11, 2010 Report Posted December 11, 2010 i have an 03 and when i bought it a few months ago the headlights hi/low work and rear taillight/brake light worked... now i just noticed i have 0 lights.. the connecters up by the two front lights are connected and the plug by rear brake resi. is connected.. is there any other plugs i am missing?? any suggestions would help thanks! Quote
banshee 268 Posted December 12, 2010 Report Posted December 12, 2010 check your bulbs and if there blown the voltage regulator might be bad Quote
muggzy Posted December 12, 2010 Report Posted December 12, 2010 (edited) check your bulbs and if there blown the voltage regulator might be bad You can also check the output on the stator to make sure you're getting a correct ohm measurement. There's a table in the Clymers manual and also somewhere on this site with the numbers you should get. The other common element is the switch on the handlebars itself. Edited December 12, 2010 by muggzy Quote
AKheathen Posted December 12, 2010 Report Posted December 12, 2010 also, if you messed around with the carbs/airbox, etc, then you could have unplugged the yellow, or black wire there......simple check Quote
midlifecrisis Posted December 12, 2010 Report Posted December 12, 2010 My suggestion is to remove all lights, and go in stealth mode, oh wait, the pipes might give you way, ok forget it! Quote
chevybanshee91 Posted December 13, 2010 Author Report Posted December 13, 2010 just checked all the bulbs today and all connections and they all look good.. checkin the stator asap.. n go from there Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.