gst_r Posted November 8, 2010 Report Posted November 8, 2010 Hi! I got in a trade a set of cylinder with CT mark on the side, i measured the bore and they are 70.14mm...i will like to know if i can bore them... here is a pic Thanks in advance Quote
jbooker82 Posted November 8, 2010 Report Posted November 8, 2010 What did they use a hammer and chisel to remove the cylinder head. They kind of looked banged up on the head sealing surface. Quote
dajogejr Posted November 8, 2010 Report Posted November 8, 2010 Depends on how thick the sleeve is in them. Also depends on piston availability...you're going to have to figure out what kind of piston you're gonna use for that size. I believe CT racing is still around. They built pretty good stuff back in the day... http://www.ctracing.com/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.