adamsj13 Posted October 20, 2010 Report Posted October 20, 2010 (edited) Hi all, what would you recommend the mix ratio for a 99 banshee. It has a 4 mil motor that was just dyno'd at 71 hp. Its jetted and has T5 pipes, coolhead and I think 34mm carbs. Im not sure about the porting. I used to run a TRX250R at 40:1, should I do the same with the banshee or 32:1 or somewhere in between? I'll be using 50/50 vp race 110 and 91 Pump with Redline racing oil. Edited October 20, 2010 by adamsj13 Quote
locogato11283 Posted October 21, 2010 Report Posted October 21, 2010 M&M ATV has done tests where more power was actually made with more oil. I would say that you can't go wrong with 20:1. Quote
blk02banshee Posted October 24, 2010 Report Posted October 24, 2010 Tune it for whatever mixture you want. I run mine at 28:1, but jetted it while running that mixture. Some oils require mixing at a certain ratio, which is fine, just make sure your jetting and air mixture is right, and the motor will be happy. Quote
apeik Posted October 25, 2010 Report Posted October 25, 2010 Hey guy's, not tryin to hijack but 4 ounces of oil is what, 32:1 or 40:1? cant find my ratio cup at the moment. And i usually run 32:1. Quote
jon321 Posted October 25, 2010 Report Posted October 25, 2010 Hey guy's, not tryin to hijack but 4 ounces of oil is what, 32:1 or 40:1? cant find my ratio cup at the moment. And i usually run 32:1. Here ya go dude it dosent get any easier than this http://www.geistware.com/rcmodeling/glowpower/gas_oil_calculator.htm Quote
cudaz101 Posted October 28, 2010 Report Posted October 28, 2010 M&M ATV has done tests where more power was actually made with more oil. I would say that you can't go wrong with 20:1. Any links to the results?? Thats alot of furkin' oil...haha Im really curious. Brad Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.