yeahitsmine Posted June 9, 2010 Report Share Posted June 9, 2010 Hey guys I had pulled my motor off any ideas of some good mods y the motor is off and the trans is about to be opened ? Quote Link to comment Share on other sites More sharing options...
yfz350rider Posted June 9, 2010 Report Share Posted June 9, 2010 Well If you take the cylinders off than you might as well do a topend rebuild and get your cylinders ported, and get an after market head. If your doing the tranny might as well get a clutch, pancake bearing, and waterpump impellar. If your bike is all stock right now id recommend putting your money into what needs to be replaced, and also pipes, air filter, and a jet kit. Quote Link to comment Share on other sites More sharing options...
mofoka Posted June 9, 2010 Report Share Posted June 9, 2010 when i take my top off i'll be getting my crank bearings inspected and probably welded/balanced. I'm also thinking about getting it ported Quote Link to comment Share on other sites More sharing options...
firebanshee Posted June 9, 2010 Report Share Posted June 9, 2010 If you are going to get it ported, drop in a 4mil crank and get it ported for the crank,if budget allows. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.