Banshee dav Posted May 24, 2010 Report Share Posted May 24, 2010 Every thing was running fine. Then it just lost it's power. I changed plugs. That didn't help. I check compression and i have 150psi in each cylinder.Carbs are clean. It cranks fine and revs good in neutral. But when in gear it has no power. It revs clean but it sounds like it is only turning half it's rpm's. Quote Link to comment Share on other sites More sharing options...
firebanshee Posted May 24, 2010 Report Share Posted May 24, 2010 Every thing was running fine. Then it just lost it's power. I changed plugs. That didn't help. I check compression and i have 150psi in each cylinder.Carbs are clean. It cranks fine and revs good in neutral. But when in gear it has no power. It revs clean but it sounds like it is only turning half it's rpm's. You could check your flywheel,maybe it came loose and now your timing is off? Quote Link to comment Share on other sites More sharing options...
Banshee dav Posted May 24, 2010 Author Report Share Posted May 24, 2010 You could check your flywheel,maybe it came loose and now your timing is off? The flywheel is fine.Could it be my CDI. It is a Stage3 AMR. I got it and a new RM stator about 2 years ago. Quote Link to comment Share on other sites More sharing options...
Banshee dav Posted May 25, 2010 Author Report Share Posted May 25, 2010 (edited) The flywheel is fine.Could it be my CDI. It is a Stage3 AMR. I got it and a new RM stator about 2 years ago. It looks like my pickup coil was lose and hit the flywheel.I guess i will get a new one and see. Edited May 25, 2010 by Banshee dav Quote Link to comment Share on other sites More sharing options...
AKheathen Posted May 25, 2010 Report Share Posted May 25, 2010 ouch, that sucks make sure to find the old screws, and probably get longer ones Quote Link to comment Share on other sites More sharing options...
firebanshee Posted May 25, 2010 Report Share Posted May 25, 2010 It looks like my pickup coil was lose and hit the flywheel.I guess i will get a new one and see. That would do it, im glad you found it. Quote Link to comment Share on other sites More sharing options...
Banshee dav Posted May 25, 2010 Author Report Share Posted May 25, 2010 ouch, that sucks make sure to find the old screws, and probably get longer ones The screws did not come out they just got lose. And i can see where the flywheel hit the pickup coil. Quote Link to comment Share on other sites More sharing options...
AKheathen Posted May 25, 2010 Report Share Posted May 25, 2010 The screws did not come out they just got lose. And i can see where the flywheel hit the pickup coil. ah, if they were wobblin for a bit, the threads might be worn out. Quote Link to comment Share on other sites More sharing options...
Banshee dav Posted May 26, 2010 Author Report Share Posted May 26, 2010 ah, if they were wobblin for a bit, the threads might be worn out. Yea i will replace them also with the new pick-up coil. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.