lots of banshee parts from part out

[400rednEX]

prices are without shipping, insurance, and tracking. parts are off a 92 banshee

 

clutch- magnum basket with primary gears, newer inner and outer hubs, fast clutch, and stock and heavy springs. parts have some wear but worked good. $80 for all

YFZ450 front end a arms, shocks, and custom aluminum tie rods. lower arms are modified to fit on the banshee and tie rods are for mounting on the banshee. $250

trinity single carb kit with 38mm pwk airstriker, pod filter and outerwears, braided stainless cable, and back half of airbox for a splashguard $200

cases no breakage, can include shift forks $100

shift shaft with aftermarket spring $10

shifter lever $10

kicker lever detent was rebuilt and still snaps in place $10

internal kicker gears $15

front spindles and hubs $40

coil and cdi $45

front brake system complete $40

stock a arms and tie rods some of the boots are ripped $40

rear brake system including pedal $30

lower motor mount struts including new bushings and solid aluminum bushings. $20

stator on adjustable timing plate + stock plate $40

clutch cover stock, no water pump $15

stator cover stock, cut out behind shifter so it can be removed without removing shifter $10

grab bar stock $15

aluminum skid plate a little beat up $15

dog bones 2 $10 each

tail light $10

pingel tether $10

sprocket mount 6 bolt $10

radiator $10

fmf ram valves newer reeds $20

plastic heel guard pieces $10

frame with dnr card local pickup only $100

 

other parts that could be negotiated in with some of the bigger parts or related parts

clymer service manual

flywheel puller

new motion pro clutch cable

41T sprocket

[YoCoLifSavr]

prices are without shipping, insurance, and tracking. parts are off a 92 banshee

 

clutch- magnum basket with primary gears, newer inner and outer hubs, fast clutch, and stock and heavy springs. parts have some wear but worked good. $80 for all

YFZ450 front end a arms, shocks, and custom aluminum tie rods. lower arms are modified to fit on the banshee and tie rods are for mounting on the banshee. $250

trinity single carb kit with 38mm pwk airstriker, pod filter and outerwears, braided stainless cable, and back half of airbox for a splashguard $200

cases no breakage, can include shift forks $100

shift shaft with aftermarket spring $10

shifter lever $10

kicker lever detent was rebuilt and still snaps in place $10

internal kicker gears $15

front spindles and hubs $40

coil and cdi $45

front brake system complete $40

stock a arms and tie rods some of the boots are ripped $40

rear brake system including pedal $30

lower motor mount struts including new bushings and solid aluminum bushings. $20

stator on adjustable timing plate + stock plate $40

clutch cover stock, no water pump $15

stator cover stock, cut out behind shifter so it can be removed without removing shifter $10

grab bar stock $15

aluminum skid plate a little beat up $15

dog bones 2 $10 each

tail light $10

pingel tether $10

sprocket mount 6 bolt $10

radiator $10

fmf ram valves newer reeds $20

plastic heel guard pieces $10

frame with dnr card local pickup only $100

 

other parts that could be negotiated in with some of the bigger parts or related parts

clymer service manual

flywheel puller

new motion pro clutch cable

41T sprocket

 

do you have the factory nerf bars to go with the heel guards?

[troyzstang]

do you have the factory nerf bars to go with the heel guards?

 

I would like the stator package for $40.00. I also live in Virginia.

 

If your close I can pick it up or just reply with payment details.

 

Thanks,

Troy

[Phelps]

i will take the clutch cover if there is no damage on it. no insurance, 73401 thanks

[400rednEX]

do you have the factory nerf bars to go with the heel guards?

the outer 2 mounting tabs are cut off the nerfs.

[400rednEX]

I would like the stator package for $40.00. I also live in Virginia.

 

If your close I can pick it up or just reply with payment details.

 

Thanks,

Troy

i couldnt pm you. either add $10 for shipping or send me your zip for a shipping price. my paypal is [email protected]

[400rednEX]

Pics of the skid plate.

i have never figured out how to resize pics right to post them so if you want pics send me your email.

[Phelps]

upload your photo's to photobucket.com and use the img code, or direct link.

 

[email protected] for photo's of the clutch cover. thanks

[ellison445]

Pics of the clutch setup to [email protected]

[pondtunes]

i couldnt pm you. either add $10 for shipping or send me your zip for a shipping price. my paypal is [email protected]

'

 

if this stator doesn't work out i am desperate for one! need shiping to salisbury, nc 28147 funds in hand!

[Coco Peru]

I´ll take the plastic heel guards, can you PM me the details.

thanks

[James-26]

I sent you a PM on the stator, adjustable timing plate, and flywheel puller last night. How much shipped to Indiana 46140.

[troyzstang]

i couldnt pm you. either add $10 for shipping or send me your zip for a shipping price. my paypal is [email protected]

 

Thanks

Shipping Zip is

Va beach Va 23453

I send payment as soon as I hear back from ya

[troyzstang]

Thanks

Shipping Zip is

Va beach Va 23453

I send payment as soon as I hear back from ya

Hey it's Troy again. Sounds like the guy from Salisbury NC needs this quicker then I do ( Pondtunes)

Please feel free to close the deal with him.

 

I'll catch the next one that comes along.

 

Thanks,

Troy

[pondtunes]

Hey it's Troy again. Sounds like the guy from Salisbury NC needs this quicker then I do ( Pondtunes)

Please feel free to close the deal with him.

 

I'll catch the next one that comes along.

 

Thanks,

Troy

 

 

Damn troy you rock man! I owe you big time