Detroit Muscle Posted March 12, 2010 Report Share Posted March 12, 2010 Alright I'm parting out my banshee, here's what I have. All parts are located in Delton, MI. About 20-30minutes north of Kalamazoo. -Motor: In process of putting new crank into it because of seized rod bearing, nothing else hurt only about 5 or 6hrs on it, strong running trail ported stock stoke. Will update when done with price/pics -Frame($200+shipping) No title, no bends, dents, etc.. Bought off CL and had PC'd gloss black, shaved off unneeded tabs as well. -Front Suspension($450+shipping) Black YFZ a-arms, tie rods, hubs, disk brakes, lower right a-arm has dent due to rock in trail, have pics. Dent is noticeable but does not affect the functionality of the arm. Shocks are Arctic Cat sno-pro 440 shocks w/ remote rezzies. This front end is the smoothest I've ridden. Will increase your width by about 2 1/4 on each side and about 1 forward. -Raptor Rear shock($50+shipping) I believe it's from a 660r, works great with setup. -Durablue +4 axle($200+shipping) In good condition, could use some cleaning/polishing. -Stock Swinger($50+shipping) Stock swinger in fine shape, painted black. -Shearer Sm Bore in-frames($400+shipping) Chrome is in great condition, will repolish before sale, 2 sets of silencer tubes included. One set normal outside of seat, other set custom bent for dual exhaust right under the seat inside the frame. Both included. -35mm PWK's($250+shipping) Carbs in good condition, low hours. -K&N Pods($50+shipping) Outerwears included, one outerwear has hole bunrt in it from pipe. -Billet Intake($100+shipping) Can't remember what I paid for it, or what brand it is, but it is in perfect condition. Correct me if my pricing is way off. -Rolling Chassis($850obo) If someone wants to buy my entire chassis with all suspension included. Alright I believe this is all the big stuff I have that I can think of at the moment, but I have the entire quad minus the plastics so anything else you see on it you may want or whatever let me know if it's not listed. Can get more pics if needed. All prices negotiable, would prefer local buyers so I don't have to ship. Pics can be found here: Photobucket acct Quote Link to comment Share on other sites More sharing options...
Detroit Muscle Posted March 12, 2010 Author Report Share Posted March 12, 2010 Alright I'm parting out my banshee, here's what I have. All parts are located in Delton, MI. About 20-30minutes north of Kalamazoo. -Motor: In process of putting new crank into it because of seized rod bearing, nothing else hurt only about 5 or 6hrs on it, strong running trail ported stock stoke. Will update when done with price/pics -Frame($200+shipping) No title, no bends, dents, etc.. Bought off CL and had PC'd gloss black, shaved off unneeded tabs as well. -Front Suspension($450+shipping) Black YFZ a-arms, tie rods, hubs, disk brakes, lower right a-arm has dent due to rock in trail, have pics. Dent is noticeable but does not affect the functionality of the arm. Shocks are Arctic Cat sno-pro 440 shocks w/ remote rezzies. This front end is the smoothest I've ridden. Will increase your width by about 2 1/4 on each side and about 1 forward. -Raptor Rear shock($50+shipping) I believe it's from a 660r, works great with setup. -Durablue +4 axle($200+shipping) In good condition, could use some cleaning/polishing. -Stock Swinger($50+shipping) Stock swinger in fine shape, painted black. -Shearer Sm Bore in-frames($400+shipping) Chrome is in great condition, will repolish before sale, 2 sets of silencer tubes included. One set normal outside of seat, other set custom bent for dual exhaust right under the seat inside the frame. Both included. -35mm PWK's($250+shipping) Carbs in good condition, low hours. -K&N Pods($50+shipping) Outerwears included, one outerwear has hole bunrt in it from pipe. -Billet Intake($100+shipping) Can't remember what I paid for it, or what brand it is, but it is in perfect condition. Correct me if my pricing is way off. -Rolling Chassis($850obo) If someone wants to buy my entire chassis with all suspension included. Alright I believe this is all the big stuff I have that I can think of at the moment, but I have the entire quad minus the plastics so anything else you see on it you may want or whatever let me know if it's not listed. Can get more pics if needed. All prices negotiable, would prefer local buyers so I don't have to ship. E-mailing me is best. Email me at: BassLine_GT3@yahoo.com it goes to my phone. Pics can be found here: Photobucket acct Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted March 12, 2010 Report Share Posted March 12, 2010 Got any pics of the altered silencers? Quote Link to comment Share on other sites More sharing options...
bad 350 shee Posted March 12, 2010 Report Share Posted March 12, 2010 450 for bent aarms Quote Link to comment Share on other sites More sharing options...
cobrabc1993 Posted March 13, 2010 Report Share Posted March 13, 2010 pm sent on carbs Quote Link to comment Share on other sites More sharing options...
bomar Posted March 13, 2010 Report Share Posted March 13, 2010 how much would you want for those bars and is the bar clamp billet or stock Quote Link to comment Share on other sites More sharing options...
Detroit Muscle Posted March 13, 2010 Author Report Share Posted March 13, 2010 $40 and you can have the bars with the grips, pad, and clamp, which is a billet clamp. Has a flame pattern cut into it. You can see it on rmatv. Ill try and dig up some pics of the bike with the other silencers on it. Quote Link to comment Share on other sites More sharing options...
Detroit Muscle Posted March 15, 2010 Author Report Share Posted March 15, 2010 bump Quote Link to comment Share on other sites More sharing options...
Detroit Muscle Posted March 16, 2010 Author Report Share Posted March 16, 2010 Come on guys make me some offers, I need to move these parts fast. Everything is negotiable. Also interested in a newer 4 stroke 250 or 450 dirtbike. Or possibly parts for a F350 powerstroke. Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted March 16, 2010 Report Share Posted March 16, 2010 How bout those pics, silencers and maybe a closer shot of the bars and the clamp if it's not sold. Quote Link to comment Share on other sites More sharing options...
Detroit Muscle Posted March 16, 2010 Author Report Share Posted March 16, 2010 Will do, I'm just heading to bed, ill get some pics of that stuff tomorrow morning. Quote Link to comment Share on other sites More sharing options...
FMF shee 98 Posted March 16, 2010 Report Share Posted March 16, 2010 Will do, I'm just heading to bed, ill get some pics of that stuff tomorrow morning. how much for the stator? Quote Link to comment Share on other sites More sharing options...
Detroit Muscle Posted March 18, 2010 Author Report Share Posted March 18, 2010 Wanna try and sell the motor all together if possible. Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted March 18, 2010 Report Share Posted March 18, 2010 check your pms Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted March 18, 2010 Report Share Posted March 18, 2010 How fast you wanting to sell this stuff? Still no pics? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.