Tons of banshee parts

[87sheerips]

Spring is here and its time to get rid of the inventory. I have a lot of stuff up for grabs here. Detailed pics can be provided if needed.

 

All prices listed are shipped including paypal fees. Overseas, add $20 for shipping to these prices.

 

Paypal [email protected]

 

Location: Union, MI local pickup is encouraged.

 

Please PM me with the listed item number, as well as in paypal.

 

Thanks!!

 

Banshee parts for sale 3/7/10 (Nerf bars sold locally right after I took this pic)

 

 

1. Trinity Stage IV Pipes, stainless, very nice, need cleaned and polished: $350

2. Paul Turner High Rev pipes, new high temp paint, nice pipes: $200

3. Front rim and tire: 21x7x10 One silver, one gold available: $40 each

4. Front rims (pair): 7x10 Gold, $40 for the pair

5. Gas tank, fender bolts stuck in it, comes with petcock and cap: $20

6. Radiator hoses (3): $15

7. Gas tank plastics: Red, needs clips $20. Red with Graphic, one broken tab, needs clips $15

8. Complete rear brake system w/stainless line up to +12” swinger. Fair pads. $80

9. Complete rear brake system w/stock line, blockoff plate & brake pedal. Good pads. $50

10. Rear brake caliper w/stock line, no pads. $20

11. Stock head, great shape: $15

12. Stock rear brake lines, 4 available: $8 each. Will work for up to +4 swingarm.

13. Stainless rear brake line, up to +4 swingarm: $20

14. Hinson Billet cutch basket, has damage and bolts broke off. Could be fixed? $10

15. Useable used clutch packs, all came off running machines: $10 per pack

16. Used but good Crank bearing w/seal: $20

17. Used but good Crank bearing w/o seal, 2 available: $15 each

18. Stock crank, comes with good bearings, gears and seals. Great shape. $120

19. Wiseco pistons, bore measured 63.25” ( I think they were .020” over so whatever that is lol) good shape, come with rings, pins, clips and good wrist pin bearings. $30

20. A-arm inner shaft: $8

21. Stock clutch basket and gear. Basket is blown out but gear is good. $15

22. Stock shift drum: $10

23. Axle locknuts: 1 for stock axle, could be polished up nice, has some gouges from wrench. $10

i. 1 for durablue axle, nice. $10

24. Steering stem mount $10

25. Handle bar mounts: $8

26. Shift shaft, straight: $10

27. Air intake tubes, some guy swore by them and sent them to me with carbs. Never used them. $10

28. Front brake lines, complete from master cylinder to caliper. 3 available $15 each.

29. Front brake hard lines only: $10

30. Sprocket hub, PC blue: $20

31. Rear wheel hubs PC blue $30 for pair

32. Rear Brake hub PC blue, bolts are permanent to rotor: $15

33. Rear Brake hub, raw, with rotor, useable: $10

34. Rear brake rotor, great shape: $15

35. Rear grab bar, stock, good shape: $20

36. Rear grab bar, modified, no fender mounts, has centered flag mount. PC silver vein, nice piece: $30

37. Stock foot pegs: $20

38. Amp Link, aftermarket chain roller: $25

39. Water pump impellar, stock, new: $20

40. Stock clutch insert. 2 available, good shape: $8 each

41. Clutch perch, with quick adjust: $15 shipped

42. Front Brake master cylinder, bad shape but do work with good levers, 2 available. $10 each

43. Misc. lever, 2 available. $5 each

44. Stock timing plate: $8

45. Protaper bars, bottom tube is bent, fixable. Comes with pad and good grips: $30 shipped

46. Renthal bar pad, red: $10 shipped

[troyzstang]

Spring is here and its time to get rid of the inventory. I have a lot of stuff up for grabs here. Detailed pics can be provided if needed.

 

All prices listed are shipped including paypal fees. Overseas, add $20 for shipping to these prices.

 

Paypal [email protected]

 

Location: Union, MI local pickup is encouraged.

 

Please PM me with the listed item number, as well as in paypal.

 

Thanks!!

 

Banshee parts for sale 3/7/10 (Nerf bars sold locally right after I took this pic)

 

 

 

1. Trinity Stage IV Pipes, stainless, very nice, need cleaned and polished: $350

2. Paul Turner High Rev pipes, new high temp paint, nice pipes: $200

3. Front rim and tire: 21x7x10 One silver, one gold available: $40 each

4. Front rims (pair): 7x10 Gold, $40 for the pair

5. Gas tank, fender bolts stuck in it, comes with petcock and cap: $20

6. Radiator hoses (3): $15

7. Gas tank plastics: Red, needs clips $20. Red with Graphic, one broken tab, needs clips $15

8. Complete rear brake system w/stainless line up to +12” swinger. Fair pads. $80

9. Complete rear brake system w/stock line, blockoff plate & brake pedal. Good pads. $50

10. Rear brake caliper w/stock line, no pads. $20

11. Stock head, great shape: $15

12. Stock rear brake lines, 4 available: $8 each. Will work for up to +4 swingarm.

13. Stainless rear brake line, up to +4 swingarm: $20

14. Hinson Billet cutch basket, has damage and bolts broke off. Could be fixed? $10

15. Useable used clutch packs, all came off running machines: $10 per pack

16. Used but good Crank bearing w/seal: $20

17. Used but good Crank bearing w/o seal, 2 available: $15 each

18. Stock crank, comes with good bearings, gears and seals. Great shape. $120

19. Wiseco pistons, bore measured 63.25” ( I think they were .020” over so whatever that is lol) good shape, come with rings, pins, clips and good wrist pin bearings. $30

20. A-arm inner shaft: $8

21. Stock clutch basket and gear. Basket is blown out but gear is good. $15

22. Stock shift drum: $10

23. Axle locknuts: 1 for stock axle, could be polished up nice, has some gouges from wrench. $10

i. 1 for durablue axle, nice. $10

24. Steering stem mount $10

25. Handle bar mounts: $8

26. Shift shaft, straight: $10

27. Air intake tubes, some guy swore by them and sent them to me with carbs. Never used them. $10

28. Front brake lines, complete from master cylinder to caliper. 3 available $15 each.

29. Front brake hard lines only: $10

30. Sprocket hub, PC blue: $20

31. Rear wheel hubs PC blue $30 for pair

32. Rear Brake hub PC blue, bolts are permanent to rotor: $15

33. Rear Brake hub, raw, with rotor, useable: $10

34. Rear brake rotor, great shape: $15

35. Rear grab bar, stock, good shape: $20

36. Rear grab bar, modified, no fender mounts, has centered flag mount. PC silver vein, nice piece: $30

37. Stock foot pegs: $20

38. Amp Link, aftermarket chain roller: $25

39. Water pump impellar, stock, new: $20

40. Stock clutch insert. 2 available, good shape: $8 each

41. Clutch perch, with quick adjust: $15 shipped

42. Front Brake master cylinder, bad shape but do work with good levers, 2 available. $10 each

43. Misc. lever, 2 available. $5 each

44. Stock timing plate: $8

45. Protaper bars, bottom tube is bent, fixable. Comes with pad and good grips: $30 shipped

46. Renthal bar pad, red: $10 shipped

 

Pm sent

Edited March 8, 2010 by troyzstang

[87sheerips]

Item #9 SOLD.

[wacko2000]

durablue axle nut

Can i see a better picture? Mine has been better days.

If its in good condition, Ill take it

But, are you sure its for a durablue axle???

thanks

[tecateman]

pmd and paid 33

[Building my First]

Whats the deal with the Hinson Basket, can I get some pics of it?

[robert0762]

i will take item 4 gold front rims

[robert0762]

money sent

[87sheerips]

Items SOLD:

 

4. Front rims (pair): 7x10 Gold, $40 for the pair

9. Complete rear brake system w/stock line, blockoff plate & brake pedal. Good pads. $50

33. Rear Brake hub, raw, with rotor, useable: $10

 

Thanks guys, and remember everything is OBO. I just need this stuff out of my shop.

[AKheathen]

money sent #14&38

[87sheerips]

Items SOLD:

 

4. Front rims (pair): 7x10 Gold, $40 for the pair

9. Complete rear brake system w/stock line, blockoff plate & brake pedal. Good pads. $50

33. Rear Brake hub, raw, with rotor, useable: $10

14. Hinson Billet cutch basket, has damage and bolts broke off. Could be fixed? $10

38. Amp Link, aftermarket chain roller: $25

20. A-arm inner shaft: $8

 

THANKS!

[Wertzy]

I want #10. PM me payment info please.

[istoleacamaro]

can i get a pic of the locking stock axle nut?

[Fast-Fibers]

Do you happen to have any front exhaust hangers laying around JD?

[crazyj789]

PM sent