1-4 overide

[stroking]

is it better to use a modded shift star on a override or the stock one ?

 

it feels alittle notchy.

[sleeper06]

I would say stock,with a stock spring,They even cut the stock star to a more aggressive holding pattern

[RagunCajun]

stock ftw!

 

You dont want it going into gear when you hit a bump.

[stroking]

ok the paper that came with the override said to run 5-30 oil,but that seem kinda thin,what oil works best for you guys ??

[dajogejr]

We use stock stars for our overrides, cut/weld them as needed.

We also recommend 2 qts. of ATF Type F for the trans.

 

You'll have to change it more often, but it is cheaper than motor cycle gear oil.

 

Does it feel notchy when it actually running, or when it's on the bench or in your frame with the motor killed?

 

My trans feels like crap with the motor not running, but in 3 years of hard abuse it's never let me down once, shifts like butter every time.

[stroking]

We use stock stars for our overrides, cut/weld them as needed.

We also recommend 2 qts. of ATF Type F for the trans.

 

You'll have to change it more often, but it is cheaper than motor cycle gear oil.

 

Does it feel notchy when it actually running, or when it's on the bench or in your frame with the motor killed?

 

My trans feels like crap with the motor not running, but in 3 years of hard abuse it's never let me down once, shifts like butter every time.

 

when i ride it,and sometimes it wont go in to the next gear unless i let off the gas alittle...the tranny was cut by wickedatv.

 

i had rottela t 30w oil in there,but i want to try something different.

 

and i tried ATF awhile back and it fired my clutch.

[stroking]

i may have the linkage set wrong also.

 

i have it set to the lowest point

[tedd1]

...and i tried ATF awhile back and it fired my clutch.

 

I would suggest that you had other issues with the clutch. Too many shees run atf, including mine, with no clutch issues.

 

Rick