Anyone who did the tors delete please come in

[35thLS1SS19]

Hey guys before i mess something up i wanted to let someone who has done it check..... This is the left carb, from the left side of the picture there are 3 holes 1, 2,3, the biggest being # 3 and i think that's the one i drill and tap? please just let me know if i am correct. thank you

-chris

 

[volcrano]

Hey guys before i mess something up i wanted to let someone who has done it check..... This is the left carb, from the left side of the picture there are 3 holes 1, 2,3, the biggest being # 3 and i think that's the one i drill and tap? please just let me know if i am correct. thank you

-chris

 

yes the big one under the screw that holds the hold down tab for carb top.

[AKheathen]

is there a writeup on this yet?

[35thLS1SS19]

i searched and searched for pictures but came up with nothing. But i did it just waiting on jets so i can start her up and ride!

[No Limit Powersports]

Thats the one the biggest of the 3 just make sure and use a file to knock the angle off of it so the jam nut will seat.

[TwistedSheeRida]

yeah file the top flat and stick a piece of wood or something in the carb when drill through so you dont hit the other side. its best to do on a drill press

[GrMeyer]

+3 on filing it flat. Also you might want to file it down so the idle screw will be able to go in more. I had that prob my first time and just had to file it down some more. Also make sure you get the black box under the tank or you will have a No Go on starting.

[RedStrapperRacing]

Your right on the money boss - take TwistedShee & GRMeyer's advice, all on point.

If you have the idle kit the step by step should have came with it but here is a link with free directions & further tech support if needed.......

 

http://www.toomey.com/

[AKheathen]