dragdaman Posted October 5, 2009 Report Posted October 5, 2009 here is my latest build i thought i wanted something faster but this thing is too much bike for me! so here goes.. lsr hillshooter chassis +8 front antifreeze green/chrome shaws all around +14 no link aluminum swinger jj&a hillshooter axle/w new style 3 bolt sproket hub all chrome rear brake setup toomey aluminum radiator/temp cap clear radiator hose/modquad cooler/temp gadge aluminum drag tank lonestar hubs n smoothies up front New skat trak 14 pld stgd ripper 25x12-9 82+ ro on douglas(1 pass) pingle kill switch new moose aluminum throttle rtc clutch lever/new cable drag bars/flame grips/lsr clamp/chrome stem 05 seat unshaved new complete 530ek zzz chain/sprokets/has chain tentioner new pingle guzzler fuel valve(polished) new two high output mikuni fuel pumps nology coil/wires motor is a 7mil DMX on stock cases all new(4 tuning passes 692cc) built/ported/tuned by andy of m&m atv! cpindustries dmx cylinder/head(polished)85mmbore fresh nikasil/ported not sure dome size but can find out. new rods/crank by crankworks/tz and maxload bearings new custom water rail by m&m atv wit an fittings newv-force 3 reeds(custom) new billit intakes new 45mm lectrons alky/pump 2 power jets each(packard built) new cpindustries cast BIG bowl with dual fuel feeds new k&n 3-1/2x6 filters with outerwears new packard outer bearing support modquad stator cover modquad lockup clutch/cover/new flame wp cover new 8 plate complete clutch basket/clutches/pancake bearing stock ratio straight cut gears new wcr nutral down 2-5 overide(duneable) bilit power shifter chrome kicker new shear hand coned custom built for motor bb/bb one out each side drag pipes now for the bad the cases were 99% welded some epoxy but not much! but on the 5th tuning pass the chain got loose and come off and got the cases and tweaked the bearing support plate i got the plate straight again(looks good) and the cases don't leak at all just looks bad? now i ordered a set of mattoon billit cases and the matching pistons(for plate removal)that i will let go with bike for an extra fee.. i am asking $11,000 for complete bike plus a crome weelie bar that you can fab for this setup plus whatever extra stuff i have around(not much but?) i have right at $16,000 in it! or i will split it up as far as motor/roller motor package: $7,000 motor,carbs/filters,ignition,pipes,fulpumps,fuel valve/hoses,530 chain setup,all electronics,throttle evrything to drop in your chassis and go ride! complete roller: $4,000 also interested in some partial/full trades? complete cub drag bike,older camero,model a,jeep,rockcrawler,rzr s or rzr parts,im into anything cool so just let me know please email me for info: [email protected] im in northeast oklahoma pics: motor rh motor lh bike lh bike rh Quote
locogato11283 Posted October 5, 2009 Report Posted October 5, 2009 sweet bike man. good luck with the sale. Quote
dragdaman Posted November 4, 2009 Author Report Posted November 4, 2009 (edited) bump....I need to move this thing make serious cash offer on complete bike WITH THE BILLIT CASES/PISTONS(uninstalled and new)because i might just take it you never know? no trades! email offers to: [email protected] thanks,rob Edited November 4, 2009 by dragdaman Quote
dragdaman Posted November 10, 2009 Author Report Posted November 10, 2009 bump....I need to move this thing make serious cash offer on complete bike WITH THE BILLIT CASES/PISTONS(uninstalled and new)because i might just take it you never know? no trades! email offers to: [email protected] thanks,rob anyone?? i will split up motor/roller but i must sell motor first!!!! make offers..... Quote
dragdaman Posted November 13, 2009 Author Report Posted November 13, 2009 ttt i need to sell this thing so i will go 6000.00 for complete motor package-(minus new cases/pistons) or 9000.00 for complete bike i will only sell roller if motor sells first my email(sent to my phone for faster responce): [email protected] Quote
dragdaman Posted November 23, 2009 Author Report Posted November 23, 2009 ttt i need to sell this thing so i will go 6000.00 for complete motor package-(minus new cases/pistons) or 9000.00 for complete bike i will only sell roller if motor sells first my email(sent to my phone for faster responce): [email protected] OFFERS???? Quote
GhostRider Posted December 30, 2009 Report Posted December 30, 2009 how much for the seat shipped to 11413? Quote
04Jake Posted February 9, 2010 Report Posted February 9, 2010 How much for the seat shipped to 98360 Quote
Farmtruck Posted February 9, 2010 Report Posted February 9, 2010 How much for the seat shipped to 98360 this bike is sold Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.