hellride96 Posted September 21, 2009 Report Share Posted September 21, 2009 (edited) sent my cylinders to jim with 6 weeks to sandfest. went from a drag ported,stock stroke 400 cheetha that he also done. to a 4mil 421 cheetha. completely redone the cylinders, reworked the porting, transfers,exhaust porting. spent a lot of time on this motor that is setup for me.(300lbs). Got everything back a week before sandfest.(including him sending the cylinders out to be renikaseled.) got bike back together on wed. due to weather conditions here in north texas i wasnt able bust it off. So on saturday morning, it fired right off. the bike never missed a lick this weekend. very very happy with the turn out of my motor. it was well worth the wait for him to get those cylinders done, jim is a very smart and mythoughatical person. and its nice to know that it was done right. for those of you that know me or meet me out there this past weekend, you know that this bike runs freaking hard!!! very impressed with my bike, a big power gain from where it was, and it ran good then. but its nice to be able to really feel the power gain after you put it back together. nothing worse than to spend money on something and not feel that much or any of a change. i cant say enough about jim!!! so if you guys need some work done, from mild to wild, please give him a call...918-232-3950. he will not disappoint you. great customer service!! THANKS AGAIN JIM. TRAVIS Edited September 21, 2009 by hellride96 Quote Link to comment Share on other sites More sharing options...
JMADD Posted September 21, 2009 Report Share Posted September 21, 2009 sent my cylinders to jim with 6 weeks to sandfest. went from a drag ported,stock stroke 400 cheetha that he also done. to a 4mil 421 cheetha. completely redone the cylinders, reworked the porting, transfers,exhaust porting. spent a lot of time on this motor that is setup for me.(300lbs). Got everything back a week before sandfest.(including him sending the cylinders out to be renikaseled.) got bike back together on wed. due to weather conditions here in north texas i wasnt able bust it off. So on saturday morning, it fired right off. the bike never missed a lick this weekend. very very happy with the turn out of my motor. it was well worth the wait for him to get those cylinders done, jim is a very smart and mythoughatical person. and its nice to know that it was done right. for those of you that know me or meet me out there this past weekend, you know that this bike runs freaking hard!!! very impressed with my bike, a big power gain from where it was, and it ran good then. but its nice to be able to really feel the power gain after you put it back together. nothing worse than to spend money on something and not feel that much or any of a change. i cant say enough about jim!!! so if you guys need some work done, from mild to wild, please give him a call...918-232-3950. he will not disappoint you. great customer service!! THANKS AGAIN JIM. TRAVIS I gave up trying to get ahold of him. I needed a base gasket for my 10 mil Cub he build, and I forgot the thickness. Never did get to talk to him or have him return the call. Glad your motor runs good. I hope my 10 mil does...I've been fighting issues with it since it was built (long story); not builder related issues. Quote Link to comment Share on other sites More sharing options...
wacko2000 Posted September 21, 2009 Report Share Posted September 21, 2009 I have had 2 motors built by Jim My current setup is a 4mm aggressive trail/dune port with 180psi and 35mm airstrikers/cpi's and the bike is INSANE It has impressed many people, runs strong through every gear, never stops pulling. Its very impressive to ride, Jim actually reworked these jugs bc the guy before him did a half ass port job He is hard to get intouch with sometimes but its def worth the wait. Good luck with your new setup bud Joseph Quote Link to comment Share on other sites More sharing options...
lmaloch Posted September 22, 2009 Report Share Posted September 22, 2009 Glad to hear that motor worked out for you! Hope to get to see it run someday. Hows the wifey liking her shee? Oh and wheres the video? Lonnie Quote Link to comment Share on other sites More sharing options...
hellride96 Posted September 28, 2009 Author Report Share Posted September 28, 2009 whats up lonnie, just got back form sandfest, and yeah she loves her bike!! my bike turned out great could not ask for a better turn out on my engine, good to hear from you. how is the roller coming? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.