cobalt Posted September 7, 2009 Report Posted September 7, 2009 Hey I just put a Tors removal kit on my shee and now im having trouble syncing the carbs and just getting the things to run. so far the only way i can get it to start is if i put my hand over one of the carbs while i kick it for a min then release and then it will usually start next kick but the throttle is really screwy and revs way high then goes all over the place im not sure what to do ive been adjusting the cable on top of the carbs and at the thumb throttle but i cant seem to get it running any better and it still wont start without my hand over one carb any ideas would greatly help cause im at a loss Quote
shee4speed Posted September 7, 2009 Report Posted September 7, 2009 check your slides.Are they going all the way down?Did you install them in the proper sides? Quote
cobalt Posted September 9, 2009 Author Report Posted September 9, 2009 I figured it out thanks guys I like a idiot didnt put the cross over tube back on when i installed the carbs was my first time messing with them but she seems to be running great now maybe just a lil tweeking and ill be set thanks Quote
cobalt Posted September 9, 2009 Author Report Posted September 9, 2009 I figured it out thanks guys I like a idiot didnt put the cross over tube back on when i installed the carbs was my first time messing with them but she seems to be running great now maybe just a lil tweeking and ill be set thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.