speciald215 Posted September 2, 2009 Report Posted September 2, 2009 (edited) I have a 4 mil crank bored .35 over with a pretty aggressive port and i will be getting the head shaved by 0.020, running T5s. I am running stock carbs, do i need to bump them up or can i make the stockers handle the upgrades? Thanks. Edited September 2, 2009 by speciald215 Quote
87sheerips Posted September 2, 2009 Report Posted September 2, 2009 Ditch those stock carbs!! They are junk, and will cause you frustration. Go get some 33PWK's, or 35PWK's and be done with it. I have a stock stroke, dune ported motor with 35 PWKs and CPIs. It is a great combo for me, and in no way overkill. Runs great. You may want to try a CPI pipe and some bigger carbs... Hold on! Quote
bbcmudtruck Posted September 2, 2009 Report Posted September 2, 2009 I'm running a dune ported 4mil with t5s and 35pwks and get along good with them. I would like to try a set of 33s to see if that would help with a little more bottom end though. Quote
speciald215 Posted September 2, 2009 Author Report Posted September 2, 2009 What about a 2:1 carb setup? Or are they not a good thing for a duner. Quote
Havok248 Posted September 3, 2009 Report Posted September 3, 2009 What about a 2:1 carb setup? Or are they not a good thing for a duner. 2:1 setups are more for trying to build a trail bike because you'll gain on the low end and lose up top, i wouldn't suggest it for a dune setup Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.