identify carbs please

[x_doug_x]

i just picked up some keihin pj 67 raimi carbs, i'm trying to figure out what size carbs these are? there not 67mm are they? please post up something, google gives me no results neither does banshee hq

 

may also be ra1mi i'mnot sure, but google gives me nothing.

Edited August 18, 2009 by x_doug_x

[shanYE west]

Post a picture. Measure the ID of the carb. not the airfilter side.

[x_doug_x]

Post a picture. Measure the ID of the carb. not the airfilter side.

 

 

[Building my First]

Looks like a 34mm PJ.

[x_doug_x]

Looks like a 34mm PJ.

 

 

 

my current build is going to be a stock bottom end, jugs ported by herr jugs racing,

wiseco forged aluminum pistons,

boysen reeds, rad valve cages,

t5 pipes.

shaved stock head.

chriot timing plate with plus 6 timing.

 

and i just picked up a locked up bottom end, these carbs, tag bars, and some front wheels with good tires for 230 bucks. i figure i'll save up some money and do a 4mill build next. or maybe even 10

 

i'm hoping these carbs will make a good addition to my build... i dunno where jetting will be with these though, it was goin to be around 240 with the stock carbs. i suppose.

[Building my First]

The'll be good carbs for you, depending on your riding style. You might find someone in this link with T5's and 34mm PJ's.

 

http://bansheehq.com/forums/index.php?showtopic=99361

[x_doug_x]

The'll be good carbs for you, depending on your riding style. You might find someone in this link with T5's and 34mm PJ's.

 

http://bansheehq.com/forums/index.php?showtopic=99361

 

 

looks like 155 mains should be close.

[x_doug_x]

looks like 155 mains should be close.

 

 

well information from you experienced people would help. i looked at carbs and the inside diamter of the carb where it attached to the intake is bigger than the boysen rad valve cages, so i'm assuming that's going to rob power? guess i need v force reeds, will the stock cages with boysen reeds do till i can purchase the v force? any information would be great.

Edited August 18, 2009 by x_doug_x

[x_doug_x]

to the top