i need help

[nayr742003]

I just got done rebuilding my bike. I rode it like 5 times and now its not burning the oil just the gas. Someone told me it could be electrictal has anyone else had this promblem? :ermm:

[madjimmax]

Not trying to sound stupid but if you are premixing your gas how can it possibly be burning just the gas and not the oil that would be impossible. Are you saying that when your done riding that there is only oil left in your gas tank or what?

[quikshee]

I suggested the crank seal, maybe the oil he's seeing is from the tranny.

[nayr742003]

No what im saying is well when u fire the bike up it has a dead side not firing. I pulled the plug out and it was full of oil. When siting on the bike its the left cylinder doing it. I was told by a few people it could be electrictal i dont know thats y im asking for help on it. I dont want to just go in and tear it down. I'm trying all angels on this to try to figure it out.

[bassmaster345]

Have you tried swapping plug wires? If not put the left wire on the right side and vise versa and see if the problem follows the wire(make sure you put some new plugs in also), if so it is probably your plug cap. If this don't solve it you have other problems.

[lt250rfd]

No what im saying is well when u fire the bike up it has a dead side not firing. I pulled the plug out and it was full of oil. When siting on the bike its the left cylinder doing it. I was told by a few people it could be electrictal i dont know thats y im asking for help on it. I dont want to just go in and tear it down. I'm trying all angels on this to try to figure it out.

 

 

like bass said check the plug wires and swapping them. mine was missing this week and kept dropping a cylinder thought it was the electrical. everything checked out good, then noticed the small link tube on the carbs came off on one side. reattached and been fine since.