sled Posted April 9, 2009 Report Posted April 9, 2009 I just ordered the carb sync tool off Jeff and I guess I should have asked him. Do I have to block off the crossover tube some how?? anybody else have this problem?? Quote
jbooker82 Posted April 9, 2009 Report Posted April 9, 2009 I just do mine with the crossover opean. Quote
sled Posted April 9, 2009 Author Report Posted April 9, 2009 I just do mine with the crossover opean. doesn't that kinda defeat the purpose? Quote
fastbanshee8 Posted April 9, 2009 Report Posted April 9, 2009 (edited) Nope. It flows the same, both ways, and besides, the tool measures the air coming into the backside of the carbs, not the fuel/air mixture going out the front, which is what the balance tube will affect. That carb sync tool is the shit. No matter how good of an eye you think you've got, you'd be surprised how far off they really are. Edited April 9, 2009 by fastbanshee8 Quote
sled Posted April 10, 2009 Author Report Posted April 10, 2009 Nope. It flows the same, both ways, and besides, the tool measures the air coming into the backside of the carbs, not the fuel/air mixture going out the front, which is what the balance tube will affect. That carb sync tool is the shit. No matter how good of an eye you think you've got, you'd be surprised how far off they really are. I've been told that like 8 times in the last 2 weeks! I guess we're gonna see! Quote
R. Rollins Posted April 12, 2009 Report Posted April 12, 2009 Hey I believe there is a video of the Carb sync in the top of the videos section. Check it out. Quote
dajogejr Posted April 13, 2009 Report Posted April 13, 2009 In addition to what's said above, you'll also be surprised how far off your idle speed is on the carbs. You can count turns and eyeball all you want. That thing is dead nuts on.... Quote
rubberneck Posted April 13, 2009 Report Posted April 13, 2009 First tool any new banshee owner should buy IMHO. That and a flywheel puller Quote
sled Posted April 14, 2009 Author Report Posted April 14, 2009 Hey I believe there is a video of the Carb sync in the top of the videos section. Check it out. I know, but on street bikes they don't want them connected. Quote
rubberneck Posted April 14, 2009 Report Posted April 14, 2009 do they work on any size carbs? There are adaptors to make it work with any size. I have an old one that i used on my VW's, so i didn't have the correct adaptor. I just went to the local ACE hardware and found one of the rubber fittings that you would use to connect cast iron pipe to pvc that fit snug over the carbs and then reduced down to seal on my synch gauge it works perfect. Quote
Willie the wimp Posted April 15, 2009 Report Posted April 15, 2009 That was the best $50 I spent for a long time. Using that sync tool saves so much time and tunes her up so much better. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.