yammyboy3 Posted March 27, 2009 Report Posted March 27, 2009 so when i ripped my motor apart i realized there was no washer behind the flywheel bolt iv always seen thick 3 cm washers anyone know were i can get a cheap one ??? also am going to be looking for a set of stock bore oem cylinders as i talked to jeff at fast and he said mine are well .... warped and twisted cuz that certain someoen that had the bike before me torqued it down without a torque wrench go figure so i need prices on both of them Quote
banshee(911) Posted March 27, 2009 Report Posted March 27, 2009 so when i ripped my motor apart i realized there was no washer behind the flywheel bolt iv always seen thick 3 cm washers anyone know were i can get a cheap one ??? also am going to be looking for a set of stock bore oem cylinders as i talked to jeff at fast and he said mine are well .... warped and twisted cuz that certain someoen that had the bike before me torqued it down without a torque wrench go figure so i need prices on both of them i would get a hold or pm nyuk his names jon great guy and most always has what your looking 4 Quote
98_shee Posted March 28, 2009 Report Posted March 28, 2009 I dont think there is a washer behind the flywheel nut. Neither one of my bikes have one. Quote
yammyboy3 Posted March 28, 2009 Author Report Posted March 28, 2009 I dont think there is a washer behind the flywheel nut. Neither one of my bikes have one. theres gotta be i couldnt get any of my sockets in there i had to go buy a cheapie 17 m socket to get it off Quote
NYUK Posted March 28, 2009 Report Posted March 28, 2009 i got 64 mm cylinders, no scoring, no porting 200 shipped. Quote
bellracing2 Posted March 28, 2009 Report Posted March 28, 2009 so when i ripped my motor apart i realized there was no washer behind the flywheel bolt iv always seen thick 3 cm washers anyone know were i can get a cheap one ??? also am going to be looking for a set of stock bore oem cylinders as i talked to jeff at fast and he said mine are well .... warped and twisted cuz that certain someoen that had the bike before me torqued it down without a torque wrench go figure so i need prices on both of them pm sent , all parts from a good running 01 Quote
BansheeDan Posted March 29, 2009 Report Posted March 29, 2009 pm sent , all parts from a good running 01 There is no washer behind the flywheel nut. I just had mine off and back on yesterday. Dan Quote
yammyboy3 Posted March 30, 2009 Author Report Posted March 30, 2009 There is no washer behind the flywheel nut. I just had mine off and back on yesterday. Dan alright thanks guys i figured it was like a damn blaster such a pain to get a socket in there all the sockets i have are for the damn impact gun :-/ anyone happen to have a 4/156 rear hub the olddd hub i just need one my banshee came with them on there with some 10x10s on beatup holeshots and well i had to cut one off anyway id like to get another one of them hubs i think im gonna use the worn down tires and burn them up so i have some slicks to see what im running at the track when i get this 4 mill back togther i dont really want to take my brand new holeshot HDs on street Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.