bansheeqc Posted March 21, 2009 Report Posted March 21, 2009 2 into 1 carb setup on drag bike are able to feed fuel to a drag motor? like this ebay add? http://cgi.ebay.com/ebaymotors/Yamaha-Bans...628827QQptZATVs Quote
Wildcardracing Posted March 21, 2009 Report Posted March 21, 2009 It will hurt the peak power output of the motor. Quote
jbooker82 Posted March 21, 2009 Report Posted March 21, 2009 Yea that isnt going to be good. You ever see any track and field guys breath through a straw with there nose's pluged? Same affect. Quote
lowbuckracing Posted March 21, 2009 Report Posted March 21, 2009 My buddy had a ten mill single carb that wasnt shy...I know you get more out of the dual...But the single will also work nicely.. Quote
bansheeqc Posted April 8, 2009 Author Report Posted April 8, 2009 I think it's not the best set up, but i see a couple of bike with drag pipe, drag frame etc..with a single carb, i'm surprised, but if this set up are able to feed 10 mill, it's good probably enought to feed a heavy dune ported / slighly drag ported bike stock stroke, stock cylinder... Quote
Sammy Posted April 8, 2009 Report Posted April 8, 2009 I always pictured single carbs to be more of and all around setup. Great low-mid and slack off where the duals shine @ WOT. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.