Jump to content

Recommended Posts

Posted

just got motor done runs good until about half throttle then cuts out no power got 195 jets in 34pj carbs any thoughts?? running 6 inch k&ns

Posted
yeah way to big of mains.158 or 160 or so will do well.
elev is 1250 or so in missouri near springfield the needle is up 1 clip
Posted
elev is 1250 or so in missouri near springfield the needle is up 1 clip
i put a set of 150s in today and it runs the same like its got a high end miss runs good til a certain rpm then cuts out +4 on timing.. this thing is killing me!!
Posted
Start with 165 and work your way down. Look at your plug, it will tell you everything you need to know.
i cant get a good plug reading because i cannot use the throttle like i should if i get the bike under a pull it cuts out but it revs great sitting still..
Posted
Plug caps or coil bad
might be?? the bike is an 06 i wouldnt think so though but i have seen stupider things!
Posted
Also check your pick-up gap. Sounds real similar to what my buddies bike was doing.
yse put new plugs after changing main had 6s in it put 7s in it now .. will check gap on pickup..thanks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...