97banshee07 Posted February 20, 2009 Report Posted February 20, 2009 I am new to banshees and dont know a whole lot about them. I have one good cylinder and one bad one so i figure i will just bore them, will I be able to run a stock crank or will I need a long rod kit or am i just completely wrong all together. Quote
CBAIER1206 Posted February 20, 2009 Report Posted February 20, 2009 Go to a local shop and get them bored over and do new pistons and rings and reassemble...should cost you no more than 300 buck and your bike will be like brand new! Quote
badassbanshee479 Posted February 20, 2009 Report Posted February 20, 2009 you dont need a different crank if you are just getting the cylinders bored to the next useable size.... Quote
swrbansheeboy Posted February 21, 2009 Report Posted February 21, 2009 agreed, as long as your crank isnt trashed then you should be good with a bore and pistons.... Quote
97banshee07 Posted February 22, 2009 Author Report Posted February 22, 2009 my crank is junk the skirt broke off the piston and the rod bearings are wiped out Quote
spurdy Posted February 22, 2009 Report Posted February 22, 2009 (edited) my crank is junk the skirt broke off the piston and the rod bearings are wiped out I have a good stock crank trued and welded that I may be willing to part with. PM if interested. SP Edited February 22, 2009 by spurdy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.