Andy P in WA Posted February 12, 2009 Report Posted February 12, 2009 Anyone here running the T-5's with just the plain steel finish? If so have you noticed any problems? Do they seem to want to rust up or anything like that? I have to admit, I was looking to go cheap with 2 sets but don't want them deteriorating on me faster than they should!!! Thanks to all Quote
CBAIER1206 Posted February 13, 2009 Report Posted February 13, 2009 You will definately start to see rust spots if you dont take care of them as is also true with chrome pipes, although I imagine they don't start to show signs of rust nearly as fast... Quote
boneyardbanshee. Posted February 13, 2009 Report Posted February 13, 2009 there is a guy trying to sell a set on here if your interested. They look like they are in perfect shape. Quote
bode1 Posted February 13, 2009 Report Posted February 13, 2009 When you say plain steel are they raw and unpainted? If so, can you just clean them with wd40 and scotch bright pads like unchromed pro circuits? Quote
boneyardbanshee. Posted February 13, 2009 Report Posted February 13, 2009 yup you just need to keep up on them. Even with chrome you need to do maitnence so they wont rust. At least with the raw you can get them to look uniform again. Once the chrome starts to go its gone. Quote
bode1 Posted February 13, 2009 Report Posted February 13, 2009 I wish i'd gotten unchromed now. You let that chrome go for a while and it's a real pain. I'd rather just scrub the shit outta them with wd40 Quote
dragbanshee Posted February 13, 2009 Report Posted February 13, 2009 Anyone here running the T-5's with just the plain steel finish? If so have you noticed any problems? Do they seem to want to rust up or anything like that? I have to admit, I was looking to go cheap with 2 sets but don't want them deteriorating on me faster than they should!!! Thanks to all I run them, they look great and yeah just sos if you need too with no harm. Mine do pretty darn good, I oil them down lightly after washing it. Actually I find them to be easier to clean, and not having to worry about scratches and chrome flaking is a plus. Also gives it a mean look, I was just thinking about selling them, interested? PM me. Quote
bode1 Posted February 13, 2009 Report Posted February 13, 2009 I run them, they look great and yeah just sos if you need too with no harm. Mine do pretty darn good, I oil them down lightly after washing it. Actually I find them to be easier to clean, and not having to worry about scratches and chrome flaking is a plus. Also gives it a mean look, I was just thinking about selling them, interested? PM me. I think they kinda give it a little bit of a sleeper look too. Quote
flyRTby Posted February 13, 2009 Report Posted February 13, 2009 (edited) Personally i like the steel finish. looks mean I was looking to buy a set of used chrome or steel finished toomeys and have the ceramic coated! Black, Silver, even a "like chrome" finish. I think that'd be sick! Anyone have good luck or bad luck with ceramic coating? From what i know about car/truck exhaust, ceramic is the sheeit. A local shop quoted me 80-100 bucks per side and i think thats on the high side. I haven't really shopped around but, i'm sure i could find cheaper. Thanks in advance! Edited February 13, 2009 by flyRTby Quote
05.Banshee.SE Posted February 14, 2009 Report Posted February 14, 2009 Personally i like the steel finish. looks mean I was looking to buy a set of used chrome or steel finished toomeys and have the ceramic coated! Black, Silver, even a "like chrome" finish. I think that'd be sick! Anyone have good luck or bad luck with ceramic coating? From what i know about car/truck exhaust, ceramic is the sheeit. A local shop quoted me 80-100 bucks per side and i think thats on the high side. I haven't really shopped around but, i'm sure i could find cheaper. Thanks in advance! PM NitroTate about the ceramic coating... Quote
flyRTby Posted February 14, 2009 Report Posted February 14, 2009 I live in Michigan. Looking for someone local. Quote
278 Posted February 14, 2009 Report Posted February 14, 2009 I have a set and they make High temp clear coats that work pretty good just to stop rust for a while. I just sanded mine and hit them with a black high temp. but Im doing a little custom paint now Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.