messer007 Posted January 29, 2009 Report Posted January 29, 2009 what kinda times are you guys turning with stock motor as in that I mean stock cylinders and stock crank....in 200ft and 300ft My times in 200ft...3.59 My time in 300ft...4.95 and I tore the clutch out not even half way down the track that was the only 300ft pass I've made Quote
Natemills8 Posted January 29, 2009 Report Posted January 29, 2009 200ft-3.9 300ft-Blow up before I got to try (275lbs rider) Quote
fab shop racing Posted February 1, 2009 Report Posted February 1, 2009 When rd gets after your ass you have had the lick. Quote
05.Banshee.SE Posted February 1, 2009 Report Posted February 1, 2009 100% stock... high 9s in the 1/8th... Intake, exhaust, head/domes, timing, reeds, low compression...high 8s in the 1/8th on stock gearing and heavy ass tires. Quote
crashogden Posted February 5, 2009 Report Posted February 5, 2009 i ran a 8:20 with my setup. thats with stock gearing and american racer tires. Quote
sycopyroclown00 Posted March 6, 2009 Report Posted March 6, 2009 i ran a 8:20 with my setup. thats with stock gearing and american racer tires. heres a pic of my time slip we made this run on basically one cylinder lol Quote
yamshe Posted March 6, 2009 Report Posted March 6, 2009 heres a pic of my time slip we made this run on basically one cylinder lol what were you racing a moped? Quote
PGW303 Posted March 8, 2009 Report Posted March 8, 2009 I did a 4.60 with my stockframe, stock 350, not even ported banshee a year ago. It could have done a 4.20 probably with a port job and a lock up. Rich wood has the fastest 350 I've ever seen. He has it ported by A&S and ran I believe a 4.24 or something around there. Completely in a stock frame too. Quote
shanYE west Posted March 8, 2009 Report Posted March 8, 2009 How much do you weigh? we got a buddy up here that weighs 125lbs, trail port (A&S) CPI's, on race gas with +7 timing.. best he could do was 4.9's RDZ has the fastest 350 I've heard of so far. I beleive its gone 3.8's Quote
arfountain Posted March 8, 2009 Report Posted March 8, 2009 How much do you weigh? we got a buddy up here that weighs 125lbs, trail port (A&S) CPI's, on race gas with +7 timing.. best he could do was 4.9's RDZ has the fastest 350 I've heard of so far. I beleive its gone 3.8's The motor I had last year ran in the 4.7s at Bobs a couple times: it was a 350 ported by A&S, on alky, with CPI's, and stock frame. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.