messer007 Posted January 29, 2009 Report Share Posted January 29, 2009 what kinda times are you guys turning with stock motor as in that I mean stock cylinders and stock crank....in 200ft and 300ft My times in 200ft...3.59 My time in 300ft...4.95 and I tore the clutch out not even half way down the track that was the only 300ft pass I've made Quote Link to comment Share on other sites More sharing options...
Natemills8 Posted January 29, 2009 Report Share Posted January 29, 2009 200ft-3.9 300ft-Blow up before I got to try (275lbs rider) Quote Link to comment Share on other sites More sharing options...
fab shop racing Posted February 1, 2009 Report Share Posted February 1, 2009 When rd gets after your ass you have had the lick. Quote Link to comment Share on other sites More sharing options...
Natemills8 Posted February 1, 2009 Report Share Posted February 1, 2009 lol I know Quote Link to comment Share on other sites More sharing options...
05.Banshee.SE Posted February 1, 2009 Report Share Posted February 1, 2009 100% stock... high 9s in the 1/8th... Intake, exhaust, head/domes, timing, reeds, low compression...high 8s in the 1/8th on stock gearing and heavy ass tires. Quote Link to comment Share on other sites More sharing options...
crashogden Posted February 5, 2009 Report Share Posted February 5, 2009 i ran a 8:20 with my setup. thats with stock gearing and american racer tires. Quote Link to comment Share on other sites More sharing options...
sycopyroclown00 Posted March 6, 2009 Report Share Posted March 6, 2009 i ran a 8:20 with my setup. thats with stock gearing and american racer tires. heres a pic of my time slip we made this run on basically one cylinder lol Quote Link to comment Share on other sites More sharing options...
yamshe Posted March 6, 2009 Report Share Posted March 6, 2009 heres a pic of my time slip we made this run on basically one cylinder lol what were you racing a moped? Quote Link to comment Share on other sites More sharing options...
PGW303 Posted March 8, 2009 Report Share Posted March 8, 2009 I did a 4.60 with my stockframe, stock 350, not even ported banshee a year ago. It could have done a 4.20 probably with a port job and a lock up. Rich wood has the fastest 350 I've ever seen. He has it ported by A&S and ran I believe a 4.24 or something around there. Completely in a stock frame too. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted March 8, 2009 Report Share Posted March 8, 2009 How much do you weigh? we got a buddy up here that weighs 125lbs, trail port (A&S) CPI's, on race gas with +7 timing.. best he could do was 4.9's RDZ has the fastest 350 I've heard of so far. I beleive its gone 3.8's Quote Link to comment Share on other sites More sharing options...
arfountain Posted March 8, 2009 Report Share Posted March 8, 2009 How much do you weigh? we got a buddy up here that weighs 125lbs, trail port (A&S) CPI's, on race gas with +7 timing.. best he could do was 4.9's RDZ has the fastest 350 I've heard of so far. I beleive its gone 3.8's The motor I had last year ran in the 4.7s at Bobs a couple times: it was a 350 ported by A&S, on alky, with CPI's, and stock frame. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.