basic stroker questions

[banshee_guy_05]

hey all, i have been searching and asking questions to everyone i can think of and i think i finally decided i want to go with a 4mill stroker motor. Now i have a few questions that you guys may be able to answer. I want to make alot of low-mid range power without hurting my top end power. My cylinders have already had a mild trail/mx port and work great so far and are really smoothe. I am going to go with the hot rods stroker crank with wiseco stroker crank pistons. First question is do i have to have that spacer plate? Secondly do i need to re-port my cylinders? and last what is the best pipe for me to use? I am running gnarly's right now and like them but am not totally inlove with them so im thinking of going another way. didnt know if one was better for the stroker?

[FASTOYS]

Your cylinders will need to be looked at and see how far the transfers and other ports are moved to make sure they are not to radical for a 4mm. Most likely they can be used but we wont know till they are checked out. A 4mm motor will not need a spacer plate if ported correctly and used with cut domes. Give me a call if you would like to discuss a build and i will discuss different pipes vs porting configurations.

[locogato11283]

stay away from spacer plate setups. do it right, have your cylinders ported and run the correct domes.

 

call FAST up there, he can get you set up.

[banshee_guy_05]

Yeah that sounds great. I had no idea you did so much machine work and everything. Ill deffinately be in touch with you after christmas! thanks