mattmansam Posted October 6, 2008 Report Posted October 6, 2008 been reading about the 485 power valve kits and wanted to know the best place to get one. will not deal with trinity. thanks Quote
pabansheematt Posted October 6, 2008 Report Posted October 6, 2008 been reading about the 485 power valve kits and wanted to know the best place to get one. will not deal with trinity. thanksWhy wont you deal with Trinity? I bought my cheetah PV off them. They have been very helpfull with tuning and any info I needed. They even called me 3 times to make sure I was happy with my motor. Make a long story short, I had a weak coil and cound'nt get it running right. They helped me out when I was stumped. Quote
Ruko Posted October 6, 2008 Report Posted October 6, 2008 been reading about the 485 power valve kits and wanted to know the best place to get one. will not deal with trinity. thanks Unfortunately they all go through Trinity... You can get one from most any builder but they get them from Trinty first. I got mine from K&T originally, but I have had to get parts from Trinity a few times. I've had good and bad dealings with them. Ordered a set of pistons once... they said they would get them out right away... 2 weeks later I still didn't have them so I called back to see what was up and they still hadn't shipped them yet I have had nice smooth dealings with them also, so who knows... cross your fingers and hope for the best. Quote
BellicoseBanshee Posted October 7, 2008 Report Posted October 7, 2008 Well, I bought a couple things from Trinity within the last year and they were actually pretty good to me. Both parts were excellent, and they also called me two or three times to make sure I was happy (and the parts I bought from them were nothing special or expensive like a cheetah). The parts shipped immediately... Quote
FireHead Posted October 7, 2008 Report Posted October 7, 2008 Well, I bought a couple things from Trinity within the last year and they were actually pretty good to me. Both parts were excellent, and they also called me two or three times to make sure I was happy (and the parts I bought from them were nothing special or expensive like a cheetah). The parts shipped immediately... When I have dealt with Tinity in-person, I never had any sort of problem, infact they were awesome! However, they developed bad reputation as being wankers with retards with too much money and no mechanical knowledge buying their stuff and then not making it work. :geek: Quote
BigRed350x Posted October 7, 2008 Report Posted October 7, 2008 I'd call K&T, LC Performance, A&S, Kevin Herr, etc. Just call the big-name guys and see who gives you the best price. CP Industries makes the cylinders. I don't deal with trinity either. I'd call lynn at LC Performance. He always gets me good deals on stuff. - Jared Quote
BellicoseBanshee Posted October 7, 2008 Report Posted October 7, 2008 (Trinity) developed a bad reputation as being wankers with retards with too much money and no mechanical knowledge buying their stuff and then not making it work. :geek: This is only a hobby for me, but I have been around long enough to believe that is a valid point... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.