BADLANDS

[gumby6t9]

And I gotta break it in by the 10th. I think I can make it. Yea I think you can make it too. :thumbsup:

 

I have a question for who ever is running pod filters: Did you have to cut off the tabs that hold the stock airbox in place on each side of frame? their in the way, I almost hate to cut them, just in case I ever insanely decided to use box again.

 

I'm going to have to order new outerwears for my pods because when I took my pods off to clean them it caught on that damn tab and ripped one... damn.

[dragbanshee]

at what compression shoud I be considering race fuel out of curiosity

 

Starting at about 150 and above at our elev. Im at 150psi and still ok, on the border. 21cc domes Noss head

[98_banshee_newbie]

cool I should be ok because i was at 110 compr (I will need top end soon) and I just added a noss with 20 cc domes my cylinder walls are clean and no scratches. Do you guys warm up your motor first before a compression or do it cold? this was at cold

[Misssppelllleddd]

cool I should be ok because i was at 110 compr (I will need top end soon) and I just added a noss with 20 cc domes my cylinder walls are clean and no scratches. Do you guys warm up your motor first before a compression or do it cold? this was at cold

 

I run the engine until it is warm. From 125 degrees to about 150 degrees. Not hot. I'm pushing 180 compression. I have to run 110 fuel at least. But I have a little less than a month. I hope I'm not breaking it in while I'm at the Badlands.

[dragbanshee]

cool I should be ok because i was at 110 compr (I will need top end soon) and I just added a noss with 20 cc domes my cylinder walls are clean and no scratches. Do you guys warm up your motor first before a compression or do it cold? this was at cold

 

I have heard both ways being ok, I did mine cold too maybe try it warm and see what you come up with. I would think a little higher warmed up, not sure. I wanted 20cc domes but I wanted to make sure I didn't have to run to high of octane, cause I had 125psi before I put the 21cc domes on.

[ridinfast03]

HEy guys did you ever come up with a final date for this ride at attica? I live in danville IN and its not a far drive at all.

[dragbanshee]

HEy guys did you ever come up with a final date for this ride at attica? I live in danville IN and its not a far drive at all.

 

Well in that case we are going to Haspen, LOL

 

Im right down the street from you, somewhere! Welcome to the site! We planned on going Sat the 11th I think its the 11th.

[ridinfast03]

Right on man where do yo live in Danville? I just bought a house in clear creek

[dragbanshee]

Right on man where do yo live in Danville? I just bought a house in clear creek

 

Actually on the Avon/Danville line out on 10th st.

[indiana banshee]

Actually on the Avon/Danville line out on 10th st.

Put me on the list. i'm in

i Live right down from you guys. Down by Meijer in Avon.

My name is Tony

[T_Shee]

1.dragbanshee (Lyn)

2.Speedy2222(Mitchell)

3.gumby6t9 (Matt)

4. jugrigg

5.Tshee (Travis)

6.Misssppelllleddd

7.Brooklyn

8.quadatic20

9.quadracer43

10.98_banshee_newbie(Andrew)

11RollinRhino

12indiana banshee (tony)

13ridinfast03

 

right on...keep em coming

[gumby6t9]

Anyone new to the place, dont forget you have to have flags there, you can get them there for $14

 

With this many people and maybe more, maybe I can call ahead and bullshit them for some special rates. The BHQ club :yes:

 

That's a good idea!

[ridinfast03]

Sweet, whats the date for the ride though? I guess Im blind andcant find it.

[ridinfast03]

 

Ill prob bring my 4 poke. This is an older pic it now has a duncan racing front bumper and a giant desert seat from Quadtech that is blue black an silver. I am assuming this is going to go down in October? and are we heading to haspen or badlands?

[gumby6t9]

Sweet, whats the date for the ride though? I guess Im blind andcant find it.

 

Badlands... Attica,IN

Saturday October 11th. Be there when they open the gate.