Chemical Castration

www.quicksandmotorsports.com

72" rollout 9 or 10 paddle haulers would work great. 12 paddle is way too much tire! especially with the wet sand around you. If you have a dune port on race gas you should be fine with 9's but if youre pushing more than 80HP then go for the 10's.

oh man all i can say is run away!!!! All of your damn money is going to disapear. Youre gonna find youre banshee getting prettier and the fridge getting emptier and your clothes getting more outdated and worn out. Everytime i am getting ready to go to school and the only thing I have to wear is some torn jeans and a faded lack t shirt with shoes that have holes in them i walk into the garage and start yelling at my banshee (well pieces of it) then i burst into tears screaming "WHHHYYYYYYYYYYY" Is there a rehab for speed junkies?

Actually its www.directdrivecnc.com Watcha need to know about lockups?

I just got a phone call from UPS and my letter was sent back to them. They confirmed my home address and are gonna send it next day air to me so I should be receiving it tomorrow. I'm keeping my fingers crossed

You can have all the power in the world but if its not properly setup to ride to what you want it to do then youre gonna lose. Hell I'm building a drag bike right now and with the money im throwing into the suspension and tires and the whole setup I couldve just got me some cheetah cylinders with a 10mm crank hell id have 120+HP right there but i would still get my ass kicked because of my whole bike wouldnt be setup properly for drag racing. It would even get to the point where it wouldnt even be safe to ride on it. Just my $.02

I'm a student and attempting to open up a couple of businesses. Some of you know one of em but the other one is a restaurant that im still debating whether or not its worth it But I feel that if in 6 months shit doesnt work out I can just cut my losses and collect the insurance money from the mysterious fire lol j/k But seriously I do think opening up a food place would be good for me to learn about business and help me see how the real world is, and not just what they teach me in school.

You bet your ass you do! Have fun man and if that lesbo GI Jane can do it then you should have no probs with it!

I sold my swingarm a while back (changed my setup but thats a diff story) and the guy I sold it to said he needed it in a hurry so asked if I could send it through UPS and have it COD, I did have problems in the past with UPS taking forever to send me my cash after I sent something COD but I had to only wait a couple weeks. Well the guy received the swingarm on the 17th, and I have been waiting very patiently, and today I received an email from the guy that bought my swinger and he said that UPS contacted him asking for my address so they could know where to send my money... WTF! Why would they contact the god damn customer to ask where the money is supposed to go??!?!?!?!?! So I called UPS and asked what was going on and the first lady told me that my info isnt in the system so she was gonna send a message to the COD dept. and they would call me within the hour. After a few hours passed by I called them again and I talked to this guy, he told me the same thing and that they didnt have my info in the computer but they had the other guys info so they were asking him for my info since they lost mine!!!! Even the guy that I was talking to felt stupid because this makes no fuckin sense at all! So after putting me on hold 5 times he tells me that they sent out my check on the 23rd and that I have to wait 10 business days for it (Jan 9th) and if it doesnt show up then I have to file a complaint. I then asked the guy why is it that a minute ago the system didnt have my info and now the check is on its way to me? And he pretty much said that even though my name isnt in the system they can still send it out to my addy. So I dont fuckin know whats going on anymore. Has anybody on here had any problems shipping anything COD? Is it a pain in the ass to get your money if UPS loses it? PS to the moderators I realize this sounds like im bashing UPS but im really asking for advise on what to do if this check doesnt show up so please dont move this to the roosting room I'm just upset right now and I'm extremely concerned abot my money.

Man Meat that is a sweet motorhome!!! I hate going to the dunes attempting to make a tent with trashbags and twigs and some asshole with a huge motor home parks next to me I usually curl on the floor and start crying.

I just saw that over at planetsand. I wonder if it will be able t orev high enough.

Contact stu on these forums. He got his done by Martin Saint. I know he's in the UK right now but dunno if he's doing engines still. I wished I lived near Martin so he could work on my engine for me.

One thing that pisses me off alot is people that have been a member for a long time and they think theyre better than everybody else because they've been posting for so long. Personally I couldnt care less when you joined this site whether it be since the network 54 says or today, Look at PassionRE he hasnt been on here as long as alot of people on these forums yet he has so much more to offer than 90% of the members. Ive been here through the whole allpro fiasco and personally I still love this site. If you dont like this site then just leave.

Hey reas I have a nice pair of used underwear. I'll give you those and 10 bucks and you pay shipping!

W'ell see. I've changed my mind about my porting setup and have decided to go full drag on methanol, I'm gonna buy some maxxise 4 snow tires when he wants to race me. Also im gonna do my best to lose as much weight as i can from my stock frame, and I'm gonna be running ultralite paddles. My bike should weigh considerably less than before. I'm gonna do anything I can to beat my cousins damn cr 500.

its an inside joke. She lives in maine and can get lobsters for practically nothing As for me I live in Yuma, AZ

There is a shitload of shops that can do good porting for you, the best thing you can do is learn more about porting and search around the web for shops. Come back on here and ask us about the shops that you like and we'll give you the low down on them. I sent my engine to Patriot Racing Dan has great customer service and does awesome work!

I agree with NYUK the transfer area on the stock cylinders are too small, there's only so much you can do to the stock cylinders. The aftermarket cylinders have a better design and are made to go beyond what your stock cylinders can do. They also have powervalves in them witch help a ton with the lightswitch powerband that banshees are famous for. If you have aftermarket cylinders with a stroker crank your banshee can cruise around like a thumper!

My bike isnt assembled yet but I am gonna be running an RKT head. I already asked Dan @ Patriot to order me one. He came highly reccomended by multiple people. Although RKT is controversial over here, you cant argue with the fact that something custom made for what you want will work better than something that was made for everybody. And Kelsey has already proved that he is very knowledgable with combustion. I am in no way saying that RKT is the only way to go and all other heads suck. I love the NOSS heads, and I have nothing but good things to say about NOSS machine. But I prefer to go the custom route and get an RKT head.

Oh man I know I'm gonna get sooo much shit for this but IMO the best head is an RKT head. Its a bit of a hassle to get one because you have to give him all of the specs of your engine, but each head is custom made to your engine. I also like the NOSS heads they have fins in them that redirect the coolant path they cool better than the pro design one, Plus they accept the Pro Design domes so it wont be hard to get a new set of domes when you need em.

Judging by your SN I think your opinion is a bit biased but thats just me

OMG this thread got me laughing so hard but what really made me start rolling on the floor was this. OMG ninjamaster you are soo fuckin stupid!! oh wait I mean.. JOO ARR STOOPIT BOY!

Merry christmas!

Happy Birfday fixitrod!

It's www.mpracing.net