Cotton eyed Joe

Its a hydraulic clutch lever that does make engagement easier.

Bolts For Rear Shock Linkage $5.00 (Missing a nut and a washer) Steering Stem Lower Bearing, Seal, Spacer, Internal Nut. $8.00 2 Tie Rod Ball Joints. One Left Hand, One Right Hand $35.00 SOLD +10 Complete Ready To Run Swing Arm $650.00 If anyone is interested I'll edit and post picture. 46 Tooth Sprocket $15.00 NEW! Adjustable Rear Drag Strut. Made From 1144 Stress proof. 3x stronger than Chromoly. Sale Pending $30.00 More items to come as I dig through the remaining mess.

Rear Brake Light $15.00 (missing the 2 screws that hold the lens in place) Front Wheel Hubs $60.00 Tie Rods $10.00 Laser Star Headlights (No Lights Included) $80.00 Chain $100.00 2 boxes, cut, but includes 2 master links. Never run. NEW! If anyone is interested I'll grab a picture. Magura Hydraulic Clutch $30.00 Sale Pending Stock Pegs $30.00 Axle Jamb Nuts $10.00 Stock Chain Slider (Used) $10.00 SOLD 3 Front disc brakes (Used) $15.00 EACH Upper Steering Stem Block With Seals $15.00

Stock Timing Plate $12.00 Stock Head (Never Used) $40.00 Axle $90.00 Rear Wheel Hubs $50.00 Rear Brake Hub $15.00 Sprocket Hub $20.00 2 Front Brakes $70.00 1 Set of Spindles. 88-90, $40.00 (90+ Spindles are SOLD!) 2002 600 F4i Engine With All Harnesses, Custom Intake, Radiator Fan, Fuel Pump, Gauges, Air Filters $1800.00 Shipped via ForwardAir only unless you arrange shipping.

Yep. You buy it, I'll ship it. I got to get rid of all this shit clogging up my shop floor, benches, and just about everywhere else I turn and look. MORE PARTS! PARTS + FREE SHIPPING = 1. If you have a question, post it here. Try to not PM me. My PM box fills up so fast that I can't keep up sometimes. Its easier to keep track of here who wants it first as well. 2. I DO NOT ACCEPT PAY PAL! Sorry if this is an inconvenience. I never was a fan of the Pay Pal when I did use it. However, I think with the reputation I have, you won't have to worry about sending me a Money Order. 3. Due to the sizes and shapes of some of these items, I won't be able to ship them the fastest way possible in all cases. Sometimes the price difference is only $1.00 at The Post Office. Sometimes its $25.00. My goal is not to retire off of selling these items. My goal is also not to break even. 4. If you want any item shipped some other method other than USPS, please tell me, and I'll have to have it quoted. Sometimes FED EX is cheaper, sometimes UPS is cheaper, sometimes DHL is cheaper. I have a place that can quote all 4 (USPS also) before I ship. I won't even begin to guess what the shipping will be if it isn't USPS. I've shipped with USPS for years, and have a good idea what things cost. 5. If you order more than one thing I'll try to get it all into as few boxes as possible. 6. Some of these parts are new, never used. Some of these parts I bought used but in good condition. These are all sold AS IS. I will guarantee that they are all good usable parts. I don't sell junk. 7. In some cases I have more than 1 of whats listed. Ask and I'll tell you. Here's some pictures and prices. Remember, prices INCLUDE SHIPPING Radiator/Fender Brackets $10.00 Ignition Key Harness With Key $20.00 1 1/8 Fat Bar Adapters $40.00 Thumb Throttle Cover $15.00 Front Brake Ressy Cover $10.00 Clutch Insert $15.00 Water Pump Cover $20.00 +4 Rear Brake Cable $30.00 NEW SOLD! Rear Brake Block Off $10.00 SOLD! Swing arm Pivot Bolt With Dust Caps, Washer and Nut $25.00

Blanco25 bought my Marvin Shaws and had me ship them COD. The asshole at FEDEX/KINKOs didn't ship them COD, he just shipped them. Well, Blanco25 brought it to my attention, and sent me the money. I wasn't too worried about it to be honest, but I wonder how many people would have still done it. He could have easily never contacted me again. Thanks Ben!

The owner of Marvin Shaw told me they would be stiff until broken in. I never used those, so they're essentially un-used. Give the guys at Marvin Shaw an email or call. They were awesome to talk with, and deal with when I bought those. :thumbsup:

PM sent. :happy:

Fronts are 14.500" center to center.

I'll measure them as soon as I get to work. :thumbsup:

If no one wants them as a set, but wants either the fronts or the rears post in this thread and I'll put up a price for the fronts, and a price for the rears.

Fronts are STOCK banshee length.

33333333333333

123456789

Bump. :geek:

Got a front pair of Marvin Shaw Competition shocks, and a 'custom' Hillshooter rear. The length of the rear is 13.250" eye to eye free length. These have only been mounted to the bike, never used. In fact they are still a little stiff from the factory. They haven't even been broken in yet. Got the dust wiped off of them, and are ready to ship. $500 shipped. From Marvin Shaw they would be $650 plus shipping.

I always fill in the tip with a '$' followed by the amount, then a line afterwards. It would be obvious to anyone that it was changed.

Using the term 'retarded' is smart? Sounds bigoted to me.

Hey maybe this will balance things out. Enjoy. I'm going home.

Welcome! :biggrin:

I found a decent picture. Hope it doesn't offend anyone.

We just shipped a job this morning that was an urgent job for Kroger foods here. Its for the dairy line that moves the filled milk bottles/jugs down a line on a conveyor. If that line goes down they lose something like $10k per minute ($10,000) in revenue and overtime to fix shit. So their job was urgent because they were on their last spare part. Other people say its urgent to get it done though, just to get it done. lol What you been up to? Still have that mean ass hill shooter?

Trying to get shit sold. I'm working 6 days a week in the shop right now, and it must be the time of year but everyone has an emergency job to get done. I got shit stacked up to the rafters, and about as many complications to go with them whether its machines, or materials, or vendors.... I told my dad if he dies I'll kill him for leaving me in this situation lol. But the good thing is if we keep up like this we'll expand again, with either a CNC plasma cutter or another CNC mill bringing the total number of mills to 5. I'm hoping for the plasma cutter to be honest. Less baby sitting, higher quantity of work, and I can go run another machine while its running and I don't have to hire anyone. :geek: