IMHO Alba blows!!! My Uncle spent thousands on that 400cc stroker kit (he got completely ripped off) and the first time he goes to ride his new pimp ride, it blows up in like a half hour....That sucks. So, he pulled the plugs and they were white and bone dry. I asked him to check what the jets were, but he insisted that he wasn't going to touch it, and was going to make Alba take care of it. Alba ends up re-doing the entire bike, and sends it back off to my Uncle. I have no idea what they did, but this time it blew up in like 20 minutes... So, my Uncle takes his bike back FOR THE THIRD TIME!!! and tells them to break it in and be sure everything is ok. They test the bike, and blow it up!!! At this point I'm cannot even believe that after spending all this money they can't make the bike run!! So, they fix it again and said this was the last time they were going to fix it, and toss it off to my Uncle. We met out at Glamis with his newly tricked out bike , and I kept telling him you need to check out the mains to at least see whats in there. So, we pull the carbs and the bike had 290's in there !!! This bike is suppose to be "hardcore" ported with everything you can imagine done, and they put 290's in! My bike is ported/polished and I run 360 mains. I finally talked him into putting these in, and sure enough, the bike has had no more problems....Alba needs to get a clue!!!
Oh, by the way I completely smoked him. Needless to say he's a little TO'ed that he didn't have a different place do his motor work. Oh well, you live and you learn!!!
-Troy