maggdog

Pics of flywheel Sent from my HUAWEI P6-U06 using Tapatalk

Change the stator Sent from my HUAWEI P6-U06 using Tapatalk

The idea of clutch lever is good, cuz the finger can get tired in a good time of practice Sent from my SM-A500Y using Tapatalk

Understood guys thanks for the info Sent from my SM-A500Y using Tapatalk

? Yeeeeeeeeeeeees Sent from my SM-A500Y using Tapatalk

Dudes, what is the diference inside of the engine between 2 stroke and 4 stroke that makes a huges diference in the traction I asked to some guys but nobody has the answer Sent from my SM-A500Y using Tapatalk

What is the main thing on the engine or the chassis that make the wheelies less complicate to do on a banshee? Some guys talking about: sprockets or short swingarm, maybe 2 into 1 improve more response on throttle But i've seen some banshee with bolt ons that go up like a 4 stroke is a weird comparisson but is true. And i don't know why, but i've saw many banshee with bolt ons and only spin and other not What can be the main mod or combo that make enough power: Exhaust? Timing? Aftermarket Intake? Porting? Aftermarket clutch? Sent from my SM-A500Y using Tapatalk

thanks Zilla

my banshee has fmf pipes but i don't know what kind of range is, bottom end to mid or mid to top end, in the pipes has write FMF GOLD SERIES, not SST, not GNARLY, not Don Elmer Signature, so i would like know what is the range of those pipes, nothing special only for know thanks

Altitude location? Sent from my SM-A500Y using Tapatalk

Those mains are too lean try with 280 to 300 main Sent from my SM-A500Y using Tapatalk

this guy sells used good parts! Like was new Recommend.

I had a stator that I tested with ohmmeter, this had marked the ignition and pickup coil like manual specs, but when i ran, warmmed up this not run correctly, so I bought other used oem stator, and runs fine all diferent world, and both stator marks ohm spec like manual says, i think the ohms can be cheat

Got one. Thanks to Banshee SE very good seller Sent from my SM-A500Y using Tapatalk

Prices Sent from my SM-A500Y using Tapatalk

And what is the symptoms of this? My banshee has good idle and good response but in the mid to top some boggin Sent from my SM-A500Y using Tapatalk

I take off the flywheel to check and i find this inside wear Is normal or bad? Sent from my SM-A500Y using Tapatalk

If you ride your banshee about 30 minutes or 10 minutes, after warm up, and start to sputtering when you hit wide open throttle Can be many factors this help me http://www.bansheehq.com/forums/index.php?/topic/164219-explanation-of-chassis-and-engine-grounding/page-3#entry1819019 http://www.bansheehq.com/forums/index.php?/topic/172766-best-way-to-ground-motor-to-chassis/ Those topics has some pics that can help to chose a way to ground the engine to chassis This fix the problem of my banshee when sputtering when is warm up I think the problem is cuz when the stator and screw are hot can lose the contact and don't work well Note: this is a option that can fix the problem, but remeber all banshees are differents, if this don't fix yours, keep in mind other things like a coil, stator, overheating, compression, air leaks, jetting, spark plugs, plugs, quality of cables

I tested the stator ohms Ignition coil is OK 17.6 Pickup coil is OK 117 - 118 But the lighting coil mark this I tried other range The stator is shot? Or maybe the tester don't have the range to test this light coil? Sent from my SM-A500Y using Tapatalk

Where i can get seal for a works shocks. I from other country. So i can't sent to works shocks dealers Sent from my SM-A500Y using Tapatalk

Yes. My bad Sent from my SM-A500Y using Tapatalk

And 95-96 square grey plug. 97-up square white Sent from my SM-A500Y using Tapatalk

87-94

Factory plastic. Lol that sound funny but really happen i keep in mind Sent from my SM-A500Y using Tapatalk

What part? Sent from my SM-A500Y using Tapatalk