Common24

Looking for a left handed starter gun to start big drag motor thanks Sent from my iPhone using Tapatalk

I HAVE A CUSTOM DRAG BANSHEE WITH A ZR700CC ARCTIC CAT MOTOR. ALL DONE RIGHT JUST LOOKING TO SELL TO FUND MY 450 DRAG BUILD. ASKING 4,000 OBO CALL OR TEXT (502)655-7445 LOCATED IN NORTHERN KY 1986 Modified Banshee Frame - Frame has been lightened - Frame professionally painted with urethane - Billet front and rear hubs - Dura Blue rear axle - Billet dual bearing axle housing - Chromed upper J-arms and lower A-arms - Chromed steering stem - Chromed professionally made clutch cover - Chromed custom made foot pegs - Billet Marvin Shaw shocks - Titanium jack shaft that has been keyed - Chrome 12+ swing arm - Chrome drag bars with billet grips - Billet thumb throttle - Custom seat cover - Full Bore paintable plastic with billet grill - Billet pingel high flow fuel petcock ZR 700cc Modified Arctic Cat Engine - Engine was built by Luc's Performance out of Sarnia Canada who specializes in snowmobile drag racing engines - Invested $4,800 in engine modifications alone - Large VM 44 Mikuni Carburetors with plastic inserts - Custom intake manifolds to match intake ports - Ported and Polished - Oversized pistons with aftermarket connecting rods - Custom machined head - Aftermarket ignition system - Comet racing primary and secondary clutch - Custom built in-frame Decker's performance pipes - Engine runs on VP C12 -- 112 octane racing fuel

Looking for a set of 12x12 rims to fit banshee bolt pattern? Call or text (502)655-7445 Sent from my iPhone using Tapatalk

Yes message me or send I text I have all the info. Located in Kentucky Sent from my iPhone using Tapatalk

Custom Drag Banshee Precision powersports chromoly frame, chameleon painted fiberglass plastic, new motor built from the ground up no expense spared, no passes on the new motor, nothing factory. message or text me for more info (502)655-7445 reason for selling is to fund other projects, may trade with boot $4500

Anyone have a super cub head and a set of domes setup for alky? Sent from my iPhone using Tapatalk

I am looking for a nice polished water pump cover and staor cover polished. thanks

You can add me also. Bobby always answered any questions I had. So far have ordered a set of 450r aarms and now waiting for him to finish a rigid set. Great guy to deal with Sent from my iPhone using Tapatalk

Love my P238 Sig with night sights and laser. Has a Ruger Sr40c but hard to find a holster to carry the gun with a laser. Sent from my iPhone using Tapatalk

Anyone have a set of straight cuts with billet basket? Looking for stock ratio Sent from my iPhone using Tapatalk

Straight cuts? Billet basket? Sent from my iPhone using Tapatalk

Bump Sent from my iPhone using Tapatalk

I bought the truck with the lift already under it not my choice. It has been a pain in the ass keeping ball joints under it with the full throttle suspension lift. I did update to cognito upper control arms. Anymore promblems it will be converted to straight axel. This is my other ride I just sold wish I still had it Sent from my iPhone using Tapatalk

Yea 12 inch tip. 55 ton Clevis Sent from my iPhone using Tapatalk

2005 GMC Sierra LLY. 9.5 inch Full throttle suspension lift, dual resy fox shocks, 20x12 fuel Hostage with 37-12.50 NITTO trail grappler , EFI live dyno tuned from Danville diesel performance with edge cts monitor. Sent from my iPhone using Tapatalk

Looking for super cub head and straight cut gears for my super cub 4 mil drag banshee. Sent from my iPhone using Tapatalk

Talked to K&T and they didn't recommend it. The charge from the bottom end wouldn't be as great because of the greater volume. Just bought some used cases and had them sent out to be ported and bored to the 72mm. Thanks for the input Sent from my iPhone using Tapatalk - now Free

I am looking for a set of factory Banshee cases that are in good shape with no chain wack. Please let me know if anyone has a set? I am ready to purchase a set to get my Banshee build under way. thanks

I am currently building a 4 mil with super cub top end 72 bore. I have been looking for a set of cases to have sent out ported and milled to fit the super cub bore. I had a guy from here in Kentucky give me a good deal on a set K&T trenched ported and epoxied 12 mil cases. He told me that they have already been bored for the 72 mil and ported for what I need. I have talked to several guys that say that the bottom end will hold a bigger volume with the trenched cases and it will hurt the compression and be a noticeable difference. I run 200ft dirt drags here in Kentucky. Will the 4 mil in 12 mil cases cause power lose because of the case volume? Any info would be appreciated

Nobody has any cases? Sent from my iPhone using Tapatalk - now Free

I am looking for a set of cases that have been milled to fit a 472 super cub 4 mil setup! Please let me know if you have a set forsale? Sent from my iPhone using Tapatalk - now Free

Text sent on the carbs Sent from my iPhone using Tapatalk - now Free

What size motor were these on?

I recently purchased a 472 super cub and wanting to switch to a 39mm alky carbs. Does anyone have anything?

Price and pics to (502)655-7445 thanks