Derrickc14

Ok thanks. Do you know of anything else cheap and better then those by anychance or am I going to have to spend crazy money?!

I was on ebay just browsing around for some miscellaneous parts and came across these nitro complete front shocks. heres the link to the page - http://www.ebay.com/sch/i.html?_trksid=p2095.m570.l1313.TR7.TRC1.A0.Xbanshee+shocks&_nkw=banshee+shocks&_sacat=0&_from=R40 Whats your thoughts? I want to buy new ones because my bike leans too much when i turn and sometimes if im going really fast it gets a little scary lol. Not trying to spend a shit load of money or modify like you have to do with the yfz450 shocks. Thanks, Derrick...

Looking for a set of black front rims and tires if possible. Im in pa. 10-7 or 10-6

Trevorton is pretty fun.

If I ran ethanol, how many sizes up on the jetting should I start with if anyone has experience with it. I know in my gsx awd eclipse I had to dump a shit load of fuel with fic 1450 injectors and duel pumps to get fuel air ratio right. And would it even be worth running it since it would run out of a gas almost twice as fast?! I'm assuming I'd have to buy bigger carbs to do it.

whats stock length?

I have blue full flight a-arms and they appear to be stock length but im not sure. when i got to full flights website to buy tie rods, they only come in +2 or +3. not sure if i should buy the +2 or just order regular size replacements. Any insite on how i should go about this?! thanks.....

thanks! I Called them. real nice guy. Answered my questions on the spot. The guy at full flight has family issues going on so I guess that explains it?! thanks again!

Does anyone know how to get ahold of fullflightracing?! I call the number on the site and its disconnected (weird). I email and not reply back. wtf.

Damit ok. what do you like to run so i know for next time?!

I got this x-ring chain and sprocket kit from rockymountain and I read the description which says chain is already perfectly sized out of the box. Is that true?! All stock sprocket teeth on front and rear which came in the kit and my swing arm is stock.

Ok. Thank you!

Before i put my new chain and sprocket on i want to put a new seal in behind the front sprocket. I noticed that the metal hollowed out cylinder thing that the seal rides on has a real nice groove in it and would like to replace it. What is that called exactly and where to buy one. Is there any seal kits that come with it? Thanks, Derrick.

idle screw lol. After i made this I relized im a dumb ass and grabbed a screw driver and adjusted it down. then i turned each one till the needle just started to barley move. Then 2 turns out to start with. I think im going to grab the guage that reads the pressure/vacuum to get it perfect. Im anal as shit and like my stuff to be perfect. thanks guys! im really sorry for waisting your time. Derrick...... p/s i just did my pivot swing arm bearings and holy shit, what a bitch. every six months im pulling that bolt out and lubing it. If it seizes on me again ill burn the shee to the ground lol.

Im cleaning and tuning my carbs and throttle cables right now and I have both dimples show up ar the carb windows at full throttle +! . Both cables are synced and opening at the same time +! , but my right carb looks more open then my left carb - :/.? I snap the throttle and hold the left carb from snapping down so I can hear if the right carb is bottoming out. Which it does. Is that normal for the right carb to be oppen more then the one on the left with the choke??

Thanks boys! Huge help. I will try sheeriders first since hes so close to me. Thank you again Sheerider - what kit should I buy and where?

I have a 02 banchee with toomy t5's, k&n filter in box - lid/cover off and v force II reeds. Baught it off someone and i just want to do some maintenance before i ride her. I live in pa-sealevel. I need main jet size recomandations for the mods that are on it. Any help for the newbee?. first banshee ever. I did reseach for the past 3days and found some insite on jet sizes that people are running but their mods exceed mine by a long shot. thanks for you Help