junkyarddog

Any one got some a-arms for trade I powder coat so ugly is ok

I got a set of 22's I'm thinking when parts come in ill slap them in and check compression and go from there

Price on the axle

Fing trinity crap and K&T dident port theses at least there not stamped like others iv had

That's what I got from passion lol

Sent from my iPhone using Tapatalk

Don't know he was in a hurry so he could of been off a few

20-21's is what I was thinking untill jim at passion threw that curve ball at me and said 23-24's hell that's a stock head

188 is what Jim at passion racing said he done the bore job for me theses cylinders came off a flat track quad and had 17cc domes running race fuel if that helps any to get a idel on the porting

I know that's right but this is a buddy's bike were putting togather and he had theses cylinders laying around and we just had bored and are going to use them its a buget thing

Sent from my iPhone using Tapatalk

Buddy bought new used for one trip and went back to a plus 4 has pivot works bearing kit installed and looks good its a link style and stock carrier 200 or trade for a chrome plus 4 or aftermarket bling parts or ported stocker cylinders ill post pics on a few min

Here's my info 2001 banshee Just installed new hot rod crank stock stroke New top end wiseco pro light 65.50mm Stock 26mm carbs Stock intake's Air box no lid Toomey T-5 exhaust 650 elevation Trinity stage IV porting 13-41 sprockets Bike will be a dunner/aggressive trail/ play on pump gas 91oct here Any advice would be sweet just looking for a ball park this is a new build and I need to order a jet kit but I have never ran any of the Trinity Porting stuff and still not sure on the dome size I need to run with the setup the duration is 188 on the cylinders and software says 24cc domes will run 138 psi And 23cc domes will be 145psi Hell I was thinking around 20cc with the porting any ideals

Sandy josh message me and said this I ended up selling them I was sellin 2 for 50 cause I needed some of my money back when I bout one for mine it charged my acct $55 3 times but I sold them thanks it's ok tho everyone on here was thinkin I was a scammer So just bought off eBay and I'm good and moving on

Any one have any luck with this guy

Bump 225 shipped to your door can ship out today

Bansheebeef whatcha got Im on town and still have the pvl kit

Ill take the cases if you end up parting out

Still for sale and how bad is the wack and where?

I'm in a jam and need a good banshee case top and bottom ASAP

Was the crank bought new and I have what you need head or carbs I got both

Is the billet intake a 1 pice any pic's

Ill take the spacers

I have a plus 8 or 9 inch ill have to measure it I got from a friend that bought it new and used for a month it's like new with good pivot works bearings and pin let me know

Put this with the empty beer cans for scrap