Z400Banshee

the rim sizes im looking at are 9x8 or a 10x8

I'm going to be getting new wheels for my 421 build and was wondering what size would be better for trails. 9 or 10 inch?

I wont be able to send any pictures till monday because im out of town right now

I'm looking to get an extended throttle lever but noticed that the one I want says its for a 1987 banshee only. Is the throttle set up different from 87 to 88?

I have a chrome clutch cover I just bought and decided that I want to go with a regular black case instead. This is a fresh triple chrome finish with all new seals and bearing. I have it listed on ebay/ Here is the link http://www.ebay.com/itm/300861091597?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

I have 2 flywheels. 1 has a bad key way that is junk now and the other has a slight rattling sound. I'm guessing it might be a broken magnet but it came off a running bike. Is it possible to replace magnets on these flywheels?

I'm new to suspension set ups so cut me some slack lol but anyways I saw atv galaxy has stage 1 fronts with a stage 4 rear. Would this be a good set up for trails? A friend told me they wouldnt work well together, is that true?

thanks for the replies. just wanted to make sure it was on right before i torque down the flywheel

I just want to make sure I installed my woodruff key correctly. Its a stock oem key. Heres some pics of the key http://s466.beta.photobucket.com/user/shootemup1864/media/IMG_0109_zpsb5dff6cd.jpg.html?sort=3&o=0 http://s466.beta.photobucket.com/user/shootemup1864/media/IMG_0110_zpsf779d333.jpg.html?sort=3&o=1

The impeller shaft is spinning inside the bearing and the bearing is not turing at all.

I just bought a chrome clutch cover with a new bearing and seal installed. I also have a new chariot ultra high flow impeller that I tried to install but when I put the impeller shaft in the bearing, it just spun in the bearing. I loosened the bearing up and it spins a lot more freely than what it did but it still just spins in the bearing race. Looking for ideas to fix it

awesome thanks for the input

If I get some lonestar +2+1 a arms would the stock wheels be a good offset for the woods? If not what wheels offset should I get?

Thanks, Nightmare Finch- Why wouldn't you use stock length for woods? I like to see opinions

Does anyone sell aftermarket a arms that are stock length? Looking for stock length because I ride a lot of trails

You and me both lol

I'm thinking about getting a nology coil and hotwires but was wondering if i would have to rejet

Sounds like putting wires on it would be a pain in the ass lol and getting the wires in there to make contact ehh idk I'm leaning even more towards the nology coil and hotwires. Would I need to rejet to run the nology coil and hotwires?

I am rebuilding my 98 banshee motor and was thinking about putting some new wires on it being they are 15 years old. I was going to either put some taylor wires on the stock coil or go with the nology coil and hotwires. Looking for suggestions and was wondering if you guys think the nology is a better setup. Also if I do go with the nology setup would if need to rejet?

I got a set of reeds for my 98 banshee and I noticed it was missing a screw tab plate. Can I use the stock tab plate and did anyone else ever have a problem like this lol?

I just called K&T and found out his gears wont bolt onto that the hinson basket but he recommended 2.68 so ill go with his advice and buy one of his baskets too.

I do plan on doing some rode riding with this quad thats why i want to use that ratio. I'm going to call back tomorrow to talk to someone else because it sounded like i was talking to beavis and butthead

Does anyone know if 2.54 straight cut gears will work with this spring loaded basket? I just called hinson and they had some guy answer that didnt know shit and just sounded stoned

Buchanan Racing- but i'm only having him do a clean up port on them because he wanted to raise the exhaust port about 1mm and the guy at rdz racing told me that i would be going backwards in HP if he did that.

athena cylinders they came with them quad along with a bad crank lol