4mil89

Looking to see if anyone has any resistance readings from one of these stators i got one on monday of last week and only got about 30 min of riding before something let me sit without spark. I figured the guidlines of resistance for a stock stator will differ from this unit? Any help will be greatly appreciated. Im not blaming the stator just trying to rule it out so i can determine if its my cdi or the stator. -Kevin Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Would like to pics and prices on the toomey t3s and billet 28mm intakes Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

I believe its 19mm +/-.5mm Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Can you do 120 shipped for the rear shock? Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

The needle jets must have fell out of each carb when i cleaned them...ordered new ones...weird Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Interested and dibs on the remaining stator and dynoport exhaust pending pictures... Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Like they were on 35mm carbs or what? Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Dibs on the outterwears do you know some dimensions? Color? Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Deffinetly seems to rev cleaner as it ran out of fuel...float level was 21.50mm should be 19 i adjusted them to 18.6 roughly... i doubt thats going fix the issue but we will see. No other way to test the stator? Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Ok i will try that... Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

I hear that. But its a nice high output stator only 3 years old. I dont have 150 to just throw it out under suspicion of it being bad. What stator should i purchase thats reasonable in price...looks like a site sponser only sells square plug...i will need a round i think. Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

I dont believe the slides can be put in backwards cause they are "d" shaped slides. Also both pwks are the same with the same.arrangement as far as the ball on the bowl i think they both have it like that...how can i test the stator? What is spec? -kevin Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Btw it smokes pretty good but nice and even out of both pipes. Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

4mm crank 115mm rod Passion 12 port w wisecos Stock head with head spacer plate 130psi compression Ricky stator, ricky timing plate +3, ricky coil, ricky cdi Graydon proline inframes Stock intakes and cages w boysen dual stage Uni dual stage pod filters Keihin pwk 28s bored to 30mm 165 main 52 pilot jjh needle middle clip Pulled all the extra stuff out of the harness tors parking brake stuff etc Klotz supertechniplate and 93 @ 32.1 Just put the motor together got it running pretty good rode it for 4 days the other week. brought it home washed it ran it around the block was fine. pulled the steering stem out to extend it and paint it, pulled the carbs and filters to.clean and oil, changed case oil, got one.pipe welded, went to start it and usually put chokes on and give it 1 -2 kicks it fires and you can turn the chokes off right away. Bike wont start without giving it gas and its super boggy and it runs like a damn weed wacker you can push it wot and it only revs up half way, if you let off the gas it dies. Choke doesnt seem to effect it. I changed the plugs, gas, pulled the.filters off, swapped out a different.coil, pulled the carbs back apart, checked float height...im lost i really dont understand its deffinetly dumping gas seems like maybe too much gas? I dont know how, i didnt change any jetting or needle position. But when i cleaned the carbs after it wasnt running right and put them back on i turned the gas on then immediately started it and for.a split second it almost revved clean...any knowledgable suggestions would be greatly appreciated. Sorry for the book i just wanted to get as much information as possible on the table to help yous help me! Thanks Kevin Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Up Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Sold sorry for not posting that Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Im sure we could work something out...lmk what your thinking Kevin Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Special....im running a stock head...call me i know your from my area 7178264197 ill compensate you if ypu can help! Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Yes i need yet another set of 89-90 rear hubs (4x156) somehow i lost a cotter pin and my axle nut backed off...and well you know the rest Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

need a pair of these asap...hmu 717-826-5463

bump 2900 cash

bump

pm me a price

bump pm sent

i hope your kidding