2strokes4u

I agree. Mine was running the same way, I cleaned carbs and no luck. Then I tried rejetting and no luck. Leak down test was good. Took to shop and got other mods and he said that spark plug caps were shot. Thats all that was changed electrically and now it runs like a champ.

Used chrome cpi inframes BB/SF. Have pin size hole in weld on left pipe. These are on my bike and it do not hurt performance. I thought about having them fixed but decided that I would sell as is. Complete pipes (header, stinger, silencer). 365 shipped. They are still on bike. I will add close up pics tonight. Thanks

bump

Did the trade fo through. If not ill trade

29S means you have pwk 28mm carbs. you can go here: http://www.sudco.com/keihin.html#PWK

Pm sent

damn leave my cpu for an hour and come back to goodies to buy and ppl already claimed them...smh.

also have overflow container: $10

Jeff just finished my build and i know he a good guy to work with. Just call and Im sure he will help get you in the right direction.

I recently went to 7mil cub and have some stuff from previous setup to get rid of. 7mil stock cylinders 196/134 port timing, Vitos Hemi Head, Pistons, 21cc domes for 7mil: 350 Modded shift shaft: 20 stock primary gears: 50 Polished Clutch cover with black water pump cover: 75 3 bar bumper: 100 sold Reed Spacers: 15 front and rear stock shocks red springs: 50 overflow bracket: 10 stock pingel: 10 sold All prices are plus shipping and fees. all prices are negotiable Will have pictures up by tonight. Thanks

1) What type of aftermarket exhaust do you have? CPI BB inframes 2) What type of airfilter do you have? K and N 3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all 4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) Sea Level 5) What size pilot jets are you using? 52 6) What size main jets are you using? 175 7) What temperature is your Banshee jetted for? 75-80 8) Do you have a port job? Clean up Port on 7mil Cub 9) What kind of carbs? PWK 10) What size carbs? 38mm

and the flaming begins....

With those mods i would race that 700. I would be confident in racing a 4mil banshee as well. Go for it...

I have adjustable struts all the way around. 10-12 inches. I have the dog link on mine as of now but plan on getting rid of that to get rid of any unnecessary weight. When i remove dog link I will need to go shorter on the rear strut. if you are running a wheelie bar then u can do struts in front. if not then go with marvin shaws in case you 12 oclock it from the line.

DM pipes do mean Big flange right?

Damn, I wish these would fit cubs

congrats

i will add that the serval and cub are same cylinders with different port timing. Trail/mx guys use servals for the low end power. most drag racers use the cub(68mm bore) or supercub(72mm bore) for topend power., DM and DMX are cylinders for the RICH...lol. Not sure whats different between the two due to the price tag runs me away. Not sure about twister products either. my 2 cents

do you have brake calipers and rotors. Someone I know is looking for some.

Ill be there as a spectator.

90+ i believe

can u post pics or send to my email [email protected] what part of kansas?

what part of NC?