copejarm

Have a brand new yfz 450 06/09 niche twin row bearing carrier too big for my swingarm need an 04/05 87mm carrier let me know what ya got

Have a niche yfz 450 carrier never been used. Twin row bearing looking to sell or trade for an 04/05 roundhouse carrier. The 06 is too big to fit in the swing arm has minor marks from seeing if it will fit but other than that its brand new $70 shipped text 253-691-6930 for pics

Pm sent for pipes

I got a set of T'5s I'll trade I can get pics once I'm home for ya

Thanks that's what I was thinking too was just making sure I wasn't missing something. More to please my curiosity than anything else

Can anyone explain why is not the best idea to jump up or down multiple jet sizes at once? I've read go slow when jetting...I understand that jumping more than one jet size can be detrimental if your close to where you need to be but is that the only reason? Or is there something else wrong with going too fast in sizes if you know for sure your way off?

Hey Carlos just making sure you got your parts and everything was as described let me know thanks!

What he said..... not sure if you can tell a difference or not, some people swear by them some hate them but I guess that's every pipe.

There is silencers I'll throw in they are the oval style they need some TLC to come back to life

Gotta pic of the lockup?

LRD pipes great shape just sealed $175 pics won't load text for pics 2536916930

LRD adjustable look good just sealed trade for a bunch of stuff what cha got. Pics won't load text for pics 2536916930

Got stock heel guards good shape $35 shipped if ya want em

Gotta agree with everyone a hell of a guy wouldnt hesitate to buy anything from him. Only guy i knew who wanted to know when the parts showed up! That says alot!

Whats the price for a packaged deal for the 22'sface and the fronts? Shipped

Thanks for the info fellas im gonna go for it. If i F it up oh well at least ill learn something gotta buy a guage then ill attack the shit out of em. Hopefully it turns out good. Again thanks alot for the insight.

They are wiesco and they are measure 65. I guess if i dont get it right i can always bore them. Does it matter what hone i use. Im guessing the stock cylinders are not niCasil platted am i right?

See i was thinking that i know its not expensive and i know i wont only have to do it once. Im just thinking if i can do it myself instead of wait for them to be done why not. But at the same time i dont want anything to go wrong while im on a trip. Just figured id try to give it a shot with the right direction. Doesnt seem too hard

If it were me id save up for the stellars they look bad ass alot stronger plus insted of spending $150 now plus shipping then they go out in a few months then buy another pair for about $150you plus shipping your already over $300 and labor of switching them out. The ball joints go out on stellars just replace the joint not the arm. More money up front but alot better purchase in the long run. $500 shouldnt take too long to save for! Jmo

So my cylinder walls are a lil scuffed did the finger nail check everything was okay there, did some research on here about how to hone your own cylinders didnt quite find what i was looking for. Crurious to know what steps to take and what tools or type of hone. Are the stock cylinders niCasil plated. Read to do it at a 45° angle quick strokes for a 20 seconds and lube it with hone oil. Does anyone know what the sidewall variance should be? I am mechanically inclined so im sure i could do it myself with the right knowledge instead of paying someone. Is there something else im missing or need any help would be greatly appreciated. Thanks

Sweet ill link up my new card to my pay pal then ill get ya your money thanks

Would you do $75 shipped for the crank? Thanks

Is there any hq'rs in portland that happen to have any extra banshee parts? Looking for a good crank and a set of j arms thumb throttle 20x10x8 paddles and bolts for the plastic. Ill be in portland tonight and sat. Morning if you have any of that let me know thanks. Joe 253-691-6930

Is there any hq'rs in portland that happen to have any extra banshee parts? Looking for a good crank and a set of j arms thumb throttle 20x10x8 paddles and bolts for the plastic. Ill be in portland tonight and sat. Morning if you have any of that let me know thanks. Joe 253-691-6930

Yeah i think ill pick it up cause the one im replacing is welded and im going to have this one welded too so if there is anything wrong hopefully its caught before it gets put in. The guy said he has no clue about motors so hopefully it turns out good and im not getting jerked thanks for the help