willardwright59

i had a similar problem. take the reeds out and clean them real good. make sure they seal well. get all new reed gaskets when u do this, people have blown up new topends from using old reed gaskets. then make sure the choke tube is in place. are the slides in the right direction? the cut piece should be towards the air filter

i have a +4 swingarm on my bike and when ever i grab some throttle itll stand up and ride a wheelie. kevin does awesome work.

i have a +4 swingarm on my bike and when ever i grab some throttle itll stand up and ride a wheelie. kevin does awesome work.

ttt

do you have any intakes? or the boots that go from the carbs to the air box?

anyone?

i would try one out

the front wheel spacers

the lights the lid

ok i was wrong. there are 6 plugs for the lights and 3 of the lights work. can get replacements. so the price is $40 Or $65 and i buy you 3 new lights. have pics of them working. comes with remote. colors: red, blue, green, yellow, orange. few different flash modes. they did work on my stock stator, no dc conversion.

i bought some great condition pro design 20cc domes and new o ring kit. he kept very good contact and gave me a great deal. makes sure everything goes well. buy or sell with confidence!!!

have some nice durablue wheel spacers for the front end. they bolt up good and make your bike look better with a wider stance. 50$ shipped to you. atv neons are good for the DC conversion banshee. they have a remote. they can stay a solid color, flash, or transition through all the colors. 2 lights are broke. i believe theres 10 lights, with enough wire to put lights over entire frame. $50 shipped to you the ported airbox lid is great for a trail bike. it lets in all the airflow it can, but keeps dirt out. its also good condition. $10 shipped let me know if your intrested in any parts, might be able to give someone a good deal. pics will be up once i get off work.

i had shake industries do mine. they did 2 heavy ass coats and a clear. they dont usually do atv frames but my dad is good friends with the guy who runs it. he only had me pay labor which was $60

i run 15/41 gearing with 22" rear tires and i like it.but you shouldnt do it on a completely stock bike.

i was in the process of adding some billit and polished pieces to my bike when my girl said she wanted her banshee done all up too. so im looking for any and all polished, billit parts. such as waterpump cover clutch cover insert polished clutch cover billit shifter etc. let me know what you have

i think redline does that piston mod?

ill take the intake boots if youll sell seprate.

sorry, everything is sold!

i got some lights with my 400ex and im positive you can run them on a banshee with the DC conversion. theyre in good shape and all but 2 lights work but you can buy replacements off line. they change all different colors and have different flash settings. i want $50 shipped to you with the remote

WANTED: +2+1 A-ARMS STAINLESS STEEL BRAIDED BRAKE LINES, +4 REAR BILLIT POLISHED WATERPUMP COVER BILLIT CLUTCH COVER INSERT STAINLESS BOLTS FOR MOTOR COVERS CPI INFRAME PIPES&SILENCERS TOOMEY SILENCERS

ttt

i need: 34mm mikuni carb intake boots reed spacers ( if needed with 34mm carbs?) and boots from carb to air box to fit my 34mm carbs. lmk thanks!

want a grille like below, or atleast similar. http://www.roguemotorsportz.com/i1396/Modquad-Slots-Stainless-Steel-ATV-Grill-Yamaha-Banshee.aspx

pm me