GYTWYPT

unscrew the small piece. Thread the big part into your flywheel. Make sure you get plenty of thread into your flywheel. I believe this is reverse thread. Now thread the small piece back in if you took it all the way oiut tighten it down and then hit it with the impact.

well this one wont. I got the calipers out. and it is a few mm smaller than the banshee cap. Wish it would.

Rookie Group: Members Posts: 9 Joined: 5-December 05 Member No.: 19889 i have two brand new billet gas caps for sale one bio-hazard and another plain these are for honda gas tanks but however they do fit on a banshee gas tank because i do have one on mine right now. i am selling them for $35 each the biohazard is a max billet cap and the plain one is chozen performance. ABOVE Went back and found his original post. He did say they where for honda gas tanks and that they would alos fit a banshee. Guess that is what i get for not knowing myself. Oh well I am just glad he decided to send our stuff. Dont think i would take a chance on him again, but it worked out this time. I have some firends that have hondas so i can probably pawn it to one of them. Good ending all in all. Oh and if anyone is curious you can fly from Missouri to Washington and back for less than $300 later

Well it looks like it has an H etched in there so maybe it is for a honda of some kind>

I just recieved mine today. Now if i just knew what in the hell it fit i would be doing alright. To small for a banshee????? any ideas anyone? SOB after all that BS. Guess he still got me. Oh well at least he sent the cap. He probably never did say that it fit a banshee. Oh well i have a decent looking $30 paperweight now. Sweeeeeet! Maybe i can figure out how to get the old lathe set up and turn it down so it will fit. I hope yours fits TooManyToys.

Like wall rat said swap the plug wires and see if your problem switches cylinders. If it does then it is electrical. Mine did the same thing would fire on both plugs when checked, but when ran would lay down on the right side. I changed my coil and flap brushed the frame where the coil bolted on and where the ground wire whent under the regulator. I think the grounding was my issue. Unlikely a coil goes bad. Might even eliminate the key switch if you havent already. Just unplug it from the harness and run a jumper wire across the two on your harness plug. Maybe check the gap between the pickup coil and the flywheel. should be between .015 and .020 i believe.

TORS TORS TORS!!!!! Look for banshee TORS removal probably have some on ebay. If it is a used bike odds are they are already gone, but you never know.

Damn good deal if someone needed a stock kit!!!!

Yeah they are right. I dont think stock pipes are even worth there weight in scrap, and that is alot of weight. I wouldnt think you could get that out of a stock head either, shaved or not, but you might. Dont mean to shoot down your hopes, but that is reality. With the pipes for sure.

I hear ya, USPS tracking numbers suck in comparisson. Just getting more and more impatient, and this guys track record isnt real good. Like I have said before $30 doesnt mean that much to me, just the thought of someone stealing from me gets to me worse than anything. Oh well. If he sent it then it should be here by the begining of next week at the latest. I understand things come up, but i would at least get in contact with the buyer to let them know what is going on. Even if i had to have someone else do it for me. later

AND YOU WANTED TO RIDE WITH US Just kiding I have been riding mine around just need to finish jetting them damn carbs.

Are these replacment reeds for the V-force or cage and all?

Kinda strange how the items have been sent, but yet the tracking number has shown no signs of movement, and here the week is already at its end. Hmmmmmmm

What size is the piston kit?

I finally got through it, but your right that shit was hard to read. Hell this is called a forum. That means you get to say pretty much whatever you like (within some reason). If you don't like it you don't have to post back and then the thread ends. It's better than reading boreing shit all the time.

That aint no lie. Just ask sanddragger. And you would also have a banshee worth twice that of anyone built by any other builder.

Exactly what he said. When I have my cap I will let everyone know I recieved it, but it is still pretty sad that it had to come to this. And by the way the tracking number is still just that a tracking number. It has shown no movement yet. evening Jan 18.

Be a good deal if you where closer to Missouri

What kind of rpm can we get out of a Banshee?

If you have the stock stator you will need the 35 watt bulbs. You can get a Ricky Stator for less than $200 now and can run close to 100 watt bulbs. later

Well i got a pm from him finally. Gave me a confirmation number that works, but the package hasnt even been given to them yet. I will keep an eye on that number and see if the package ever goes out. Should know by tomorrow if he is sending anything at all, and i should have my damn bio hazard gas cap by the end of the week Monday at the latest. We will see. It still shouldnt have taken all this to complete a deal. Guess i will have to watch who i do business with. Stick to people like NYUK. I just sent him almost 5 times that much today, but at least know i dont have to worry about it with people lke him.

I am in the same boat as Too Many Toys. but like he said now we have an address.

Who did you ship them with? USPS doesnt have any record of that confirmation number. You are digging deeper and deeper you POS, and the more i think about it the more pissed off i get. Like i had said before i couldnt care less about $30 it is only money to me, but for some people $30 is alot of money, and people like you need to be held responsible for your POS thieving actions. Evil swings a full circle Mother Fucker!!!!!!!!!!!!

well i checked them and I dont see anything. It has been right at a month now and we havent heard from you since before the first of the year. If you sent them with delivery confirmation then it should be here before the end of the week. This is a bunch of bullshit and you know it. If you where trying to make an honest trade you would have kept up communications on your end. Or even responded more than once to my post about the whole thing to try and explain yourself. Guess we will see if this is just some more stalling by the end of the week.

Outstanding!!!!! I figured sooner or later it would come out. I am one of the "other hqers" that TMT spoke of above. I purchased a billet gas cap from this POS. Told me he was going to send it the day after i paypaled him. Then uses the excuse that he went out of town for the holidays and would send it as soon as he returned (day after new years) havent heard from him since, but now we know. Good work TMT A little further than i had hoped, but i guess thats what they make jets for.